User manual STEINEL IS 130-2

[. . . ] Toekomstlaan 6 Industriezone Wolfstee B-2200 Herentals Tel. : + 32/14/25 74 74 L EGE SENSÖRLÜ AYDINLATMA ITH. 510 TR-06370 Bati Sitesi (Ankara) Tel. : + 90/3 12/2 5712 33 RA + AUS / OFF A. 70, Millewee Boite Postale 1044 L-1010 Luxembourg Tel. : +3 52/49/33 33 STAUBO ELEKTROMASKIN A. Tvetenveien 30 B N-0611 Oslo Tel. : + 47/23 25 89 00 KALEKIN s. r. l. [. . . ] Please familiarise yourself with these instructions before installation. We hope that you enjoy this high quality product. Operation/ function After the mains connection has been made, the connected consumer illuminates for approx. drawing) with a ball-point pen or similar object and hold until the LED display switches on and off. The surrounding light is recorded for approx. Light measurement is subsequently activated. (the connected consumer is switched off, if required). From now on, the light fixture will be switched on under these light conditions. Dear customer, Thank you for the confidence that you have placed in us in purchasing your new Twilight setting: The factory-adjusted light threshold of approx. 1 lux can be modified inside the appliance as follows: at the desired switching brightness, press the button (refer to Principle The built-in photo-sensor records the brightness of the surroundings and switches the connected light fixture on when darkness falls, off again if required in night economy mode, and on again in the darker early morning hours. Setting of night economy mode: The light fixture can be switched off automatically during the night for additional energy savings. Use the control inside the unit for continuous adjustment. As supplied, the light switches itself off at approx. The electronic system contains no clock. Release the button and the unit will toggle between the following setting options. economy mode functions with these values during the subsequent nights and therefore constantly adjusts itself until optimum function is achieved. Therefore, always allow the electronic system a few days time to "learn" the new conditions 4 x flashing of the LED display = light fixture is switched on in the morning. 2 x flashing of the LED display = light fixture remains off in the morning. Warning: After the unit has been commissioned and the twilight setting readjusted, the light fixture will remain on continuously throughout the first night until the morning, in order to determine the current time values for the twilight conditions. Night after commissioning and modification of the settings. All the values set are also retained if a power cut occurs. Do not dim the light sensor, in order to ensure trouble-free operation. 7 Technical data Dimensions: Connection: Switching capacity: Response threshold: Night economy mode: Consumption: Enclosure: (H x W x D) 99 x 74 x 37 mm 230/240 V, 50 Hz max. 500 watts (fluorescent lamps, cos = 0. 5) adjustable from approx. 0. 5 to 10 lux (factory adjustment 1 lux) variable switch-off at night (factory setting: off at approx. 1. 30 a. m. ) < 0. 8 W IP 54 Declaration of conformity This product complies with the European Directive on Low-Voltage Appliances, 73/23/EEC and the EMC Directive 89/336/EEC. Functional Warranty This STEINEL product has been manufactured with great care, and its operation and safety have been tested in conformity with the current regulations. Production is also submitted to final random-sample testing. [. . . ] Production is also submitted to final random-sample testing. The warranty period is 36 months, starting on the date of sale to the user. We undertake to remedy faults caused by material or manufacturing defects. This warranty undertaking shall be performed by the repair or replacement of the defective parts, at our own discretion. [. . . ]