User manual STRONG PRIMA VI

[. . . ] Digital Terrestrial HD Receiver PRIMA VI User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Manual del usuario Manual do Utilizador Felhasználói kézikönyv Instrukcja obsługi Ръководство на потребителя Picture similar PART 1 • English Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 DEFAULT PIN: 1234 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to a Digital Audio Amplifier with S    DIF /P 3. 5 Connecting to a Digital Audio Amplifier and TV using HDMI 3. 6 Connecting to an analogue Audio Amplifier 3. 7 Connecting a USB storage device 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Timeshift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media 8. 0 Troubleshooting 9. 0 Technical Specifications 27 May 2013 15:03 2 2 2 3 3 3 4 4 4 4 4 5 5 5 5 5 6 6 6 6 7 7 7 8 8 8 8 9 9 9 9 9 12 12 15 16 16 18 20 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries, Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. All other product names are trademarks or registered trademarks of their respective owners. [. . . ] Select Yes to save the changes or No to discard. Delete Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate that Delete is selected. Use pq to highlight a channel and press OK to mark it for deletion. When you have marked all channels you wish to delete, press EXIT twice. A confirmation banner will be displayed. Select Yes to delete the marked channels or No to cancel. Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only difference is that in Radio Channel List there is no video information, so it will always display the radio background on the preview screen. 7. 1. 2 Radio Channel List 7. 1. 3 Delete all Use this menu to delete all stored channels. The receiver asks you to enter the pin code. Inside the confirmation window select Yes with tu and press OK to delete or select No to cancel. Warning!  Delete all function will permanently delete all current channels and all The favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7. 1. 4 Rename Favourite list This menu allows you to personalize the names of the 8 available favourite lists. Use pq to select Rename Favourite List from the Edit Channel Menu and press OK to proceed. The names of all groups are now displayed. Select a favourite group with pq and press OK to edit its name. A text field will now pop up at the right of the screen. Use tu pq to select characters and enter them with OK. When you have finished editing, press BLUE to save the changes. When all changes have been made, press EXIT twice to leave this menu. 11 English PART 1 • English 7. 2 Installation 7. 2. 1 Auto Scan Use pq to select Installation and press OK or u to advance. Select Auto Scan with pq and press OK to enter. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list. The receiver will store all found channels in the channel list. 7. 2. 2 Channel Scan Use pq to select Installation, press OK or u to advance. Use pq to select Channel Scan and press OK to enter. [. . . ] Select Off to deactivate Timeshift. Set the time step you like to jump forward by pressing 4 during playback of recorded files. This will only work when the info banner is displayed on screen. Time Shift to Record: f set to On the timeshifted part will be included in your recording when you I start to record the current programme. [. . . ]