User manual STRONG SRT 5001 ECO

[. . . ] Digital Terrestrial Receiver SRT 5001 ECO User manual Picture similar PART 1 · English TAblE Of COnTEnTS 1. 0 InSTRUCTIOn 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 COnnECTIOn 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to a Digital Audio Amplifier 3. 0 YOUR RECEIvER 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 3. 4 Default password: 0000 4. 0 fIRST TImE InSTAllATIOn 5. 0 mAIn mEnU 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATIOn 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TROUblEShOOTIng A. 2 SPECIfICATIOnS 2 2 4 4 4 6 6 6 6 6 6 6 7 7 7 7 10 10 12 14 15 15 15 15 16 17 English * 0, 12/Min. from French wired line per March 2010 * 0, 14/Min. from mobile network 1 PART 1 · English 1. 0 InSTRUCTIOn 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. [. . . ] Select Delete All Favourites with the pq and press OK, with tu select Yes in the confirmation window and press OK to delete or select No to cancel. 5. 1. 4 Delete all Use this menu to delete all channels. Select Delete All with the pq and press OK, then enter the Password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 group Rename In this menu you can change favourite group name. Use the pq buttons to select Group Rename and press OK to enter. With the pq buttons select a group and press OK. At the appearing Keyboard use the pqtu buttons to highlight desired letters or numbers and press OK to insert. After you entered desired group name, highlight OK at the keyboard to confirm 3. Press EXIT button to cancel the group rename. 9 PART 1 · English 5. 2 Installation 5. 2. 1 Auto Scan 1. Use the pq buttons to select Installation, press OK button to enter menu. With the pq buttons select Auto Scan, press OK to enter the menu. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. Use the pq buttons to select Installation, press OK to enter the menu. With the pq buttons to select Channel Scan and press OK to enter the menu. Use the tu buttons to select one of two Scan Modes ­ By Channel and By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. Use the pq buttons to select Installation, press OK to enter the menu. With the pq buttons select Antenna setting and press OK to enter. If On is selected, the receiver will provide 5 V antenna power (for active antennas). 4. 5. 2. 2 Channel Scan 5. 2. 3 Antenna Setting 5. 2. 4 lCn mode If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. [. . . ] Press EXIT button to exit. 5. 5. 2 Safely Remove Storage Device In "Media+" menu, select "Safely Remove Storage Device" and press OK button twice to confirm. 14 PART 1 · English 6. 1 Changing Channels There are 4 ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). Stepping through the channel list To move through the channel list, press the pq buttons on the remote control. Selected by number Enter the channel number directly by pressing numeric buttons, and press the OK button to select desired channel. Selected by on-screen channels list You can also select the required channel directly from on-screen channel list. [. . . ]