User manual STRONG SRT 5015

[. . . ] Digital Terrestrial Receiver SRT 5005/5010/5015 User Manual 1. 0 2. 0 3. 0 4. 0 5. 0 6. 0 6. 1 6. 2 6. 3 6. 4 7. 0 7. 1 7. 2 7. 3 8. 0 9. 0 9. 1 9. 2 9. 3 9. 4 9. 5 10. 0 10. 1 10. 2 10. 3 10. 4 A. 1 A. 2 A. 3 Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up Connection Connecting to Terrestrial Antenna Connecting to TV & VCR Connecting to Digital Audio Amplifier Connecting to PC Your Receiver Front Panel Rear Panel Remote Control Unit First Time Installation Main Menu Channel Organiser Channel Search Installation Timer Game Other operations Mosaic EPG function Teletext function Information Trouble Shooting Specifications Glossary of terms 3 4 5 5 5 6 6 6 7 7 7 7 8 9 10 12 12 14 27 28 29 31 31 32 34 35 36 38 40 2 PART 1 English 1. 0 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; Directly on top of or under any another equipment; On a surface which might obstruct the ventilation slots. DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: To direct sunlight or near any other equipment that generates heat; To rain or intense moisture; To any shock which may cause permanent damage to your receiver; To any magnetic objects, such as loudspeakers, transformers, etc. ; To intense vibration; Never open the cover. It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards. Your warranty will be void if the receiver has been opened. [. . . ] If your broadcaster provides the correct time offset then your receiver will change from summertime to wintertime automatically. If you set GMT Usage to OFF, Set Data and Set Time item are displayed. To set the time value manually, move the cursor to the time item and use the numeric buttons on the remote control. SCREEN 26 9. 3. 1. 7 Factory Default Select Factory default and press OK. Select YES and press OK key, the receiver will return to its factory default state, and all user data will be deleted. SCREEN 27 22 PART 1 English 9. 3. 2 Personal Style In this menu, we can set the menu colour, transparency level, border pattern and entry animation. SCREEN 28 Press UP/DOWN to select the item, and Press LEFT/RIGHT to set the value, press OK to confirm. 9. 3. 3 Parental Control In this menu, you can set channel lock status (ON or OFF), the menu lock status, parental setting and change the PIN code (shown as SCREEN 29). The default PIN code is 0000. SCREEN 29 23 PART 1 English 9. 3. 3. 1 Channel Lock Set the system channel lock to ON or OFF. If the channel locks on, user has to enter the parental PIN code correctly before watch the locked program. SCREEN 30 9. 3. 3. 2 Menu Lock Press OK to select whether you need the lock or not for the Menu, YES or NO, press OK to confirm. If the menu lock is on, then for some operations such as search program and set factory default, you need to enter your PIN. SCREEN 31 24 PART 1 English 9. 3. 3. 3 Parental setting Set some programs to lock status. If a channel is locked, the user has to enter the parental PIN code correctly before watching the locked channel. SCREEN 32 Use UP/DOWN keys to select channel which you want to lock. Press OK button to lock channel. 9. 3. 3. 4 Change PIN Modifying the password. You must enter the 4 digit password and then confirm it again; the system password will changed into the new password as shown on SCREEN 33. SCREEN 33 25 PART 1 English 9. 3. 4 System Information Display the software version information. Press OK/EXIT keys to return. SCREEN 34 9. 3. 5 System Update In this menu, you can select between "STB to STB" and "OAD". 9. 3. 5. 1 Update through STB to STB The System Update screen will appear. SCREEN 35 When it is necessary to update the System, please follow these steps: a) First power off both STBs, connect them with cross RS 232. b) Then power on master STB (master is STB from which you will copy software) and keep slave STB off. Navigate in the menu of master STB and select "System Update ­ STB to STB". c) When the status displays "detecting slave STB", power on slave STB, after the master STB detects the slave, the master starts transmission and burns. d) While transmitting and burning, it is very important to avoid other operations such as power off because this may cause destruction of the data in the FLASH memory and the receiver will need to be repaired. e) When update complete, please first power off both STBs, then disconnect the RS 232 line. Tips 26 The system updates just update the software and the programsdatabase are not be updated. PART 1 English 9. 3. 5. 2 Over Air Download (OAD) Select this option in order to update your receiver with the latest software version. The receiver will check availability of the software update on air and load the latest software, if available. Do not switch power off and do not disconnect the receiver from the aerial during update process. Availability of the software update is subject of local broadcast condition and may not work in all countries. Contact your vendor to find out more about this function. 9. 3. 5. 3 Update through PC to STB 1. Connect Computer to receiver (receiver must be power off) with a 9-pin cross cable (two females) 2. [. . . ] The Moving Picture Experts Group is founded by the ISO. MPEG is a standard method fordigital transmission of video and audio. Network A network which is also known as a bouquet is a set of channels that is offered by a single broadcaster. Referring to the Phase Alternate Line colour system adopted by European broadcasters. [. . . ]