User manual STRONG SRT 5150

[. . . ] Figure 3 PART 1 · English Table of Contents 1. 0 1. 1 1. 2 1. 3 1. 4 1. 5 2. 0 2. 1 2. 2 3. 0 3. 1 3. 1. 1 3. 1. 2 3. 1. 3 3. 1. 4 3. 1. 5 3. 1. 6 3. 1. 7 4. 0 4. 1 5. 0 5. 1 5. 1. 1 5. 1. 2 5. 1. 3 5. 1. 4 5. 1. 4. 1 5. 1. 4. 2 5. 1. 4. 3 5. 1. 4. 4 5. 1. 5 6. 0 A. 1 A. 2 Usage Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up Your DVB-T Receiver Front Panel Rear Panel Connections Connecting to your TV & VCR Basic connection with a coaxial cable Basic connection with a Scart cable Advanced connection Connection with Audio Cable RCA Connectors Connection to a digital audio amplifier using the S/PDIF output Connecting a remote eye Connecting a serial cable for downloading software Starting up Starting up for the First Time Basic settings Main Menu Service Organizer Menu Favourite Organizer Menu The Timer Menu The Installation Menu System Set-up Menu Country selection Channel Set-up Parental Lock ­ Changing PIN Code Games Basic functions ­ Remote Control Trouble Shooting Glossary of terms 3 3 4 5 5 5 6 6 6 7 7 7 7 7 7 8 8 8 8 8 9 9 9 11 12 12 13 14 14 16 16 17 19 20 2 PART 1 · English Thank you for choosing this Strong terrestrial receiver. This receiver is of our latest development and it is designed to be capable of upgrading its software through the PC. It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 5150 Digital Terrestrial Receiver and its related accessories. It is advised that first time and experienced users read this manual in order to safely install the receiver. [. . . ] An error message will appear if any of the settings are incorrect. 5. 1. 4 The Installation Menu (Please see inside cover Screen 1) All settings that are related to TV channel search are within this menu. The installation menu contains several sub menus such as "System Set-up", "Country selection", "Channel Set-up" and "Parental Lock". To access the different sub menus, apply the following: 12 PART 1 · English 5. 1. 4. 1 System Set-up Menu (Please see inside cover Screen 11) To install your receiver to your personal preferences, go to "System Set-up" menu. Then please apply the following steps: 1. Using UP/DOWN keys, select "Installation" and press OK. Using UP/DOWN keys, select "System Set-up" and press OK. Language Settings: You can change the language of the menu, audio and subtitles by applying the following steps <Please see inside cover Screen 12>: 1. Select "Language Settings" and Press OK or the Right button. Select "Menu Language" and Press OK or the Right button. Using UP/DOWN keys, select the language in which you want your menu to be displayed and press OK. The screen of the menu will change to the language of your choice. You can also choose your preferred first audio language, second audio language and the subtitle language by applying the same steps. Press BACK until you return to the main menu. TV/VCR Settings <Please see inside cover Screen13>: You can set the TV/VCR settings to your personal preferences. Check your TV and VCR user manuals for the correct settings. You can change your TV/VCR settings by applying the following steps: 1. Select "TV/VCR Settings" and press OK or the Right button. TV Mode: Press OK or the Right button and set your TV mode to "Multi", "PAL" or "NTSC". Video Mode: Press OK or the Right button and set your VCR mode to "CVBS" (Composite video) or "RGB" (preferred option if your TV set is compatible with it). Screen Mode: Press OK or the Right button and set your screen mode to "4:3 Full Screen", "4:3 Letter" or "16:9". Audio Output: Press OK or the Right button and set your audio output to "Stereo", "Left only" or "Right only" (left or Right is for mono TV sets) S/PDIF Output: Press OK or the Right button and activate your S/PDIF output on the back of your receiver, so you can connect it to a digital Audio amplifier using a coaxial cable. VCR Scart: Press OK or the Right button and set the scart output to "Auto" or "STB" (Set Top Box). [. . . ] The selected sound information is saved by channel, and is set to the sound mode when you watch the channel. Page+ for the next 5 items, Page- for the previous 5 items. Within the Videotext mode the color buttons follow the color codes of the broadcaster. In the menu follow the color codes for various functions. [. . . ]