User manual STRONG SRT 5216

[. . . ] Digital Terrestrial Receiver SRT 5216 User manual picture similar PART 1 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV and DVD/Video Recorder 3. 3 Connecting to a Digital Audio Amplifier 3. 4 Connecting to RCA (Audio L/R, Video) 3. 5 Connecting a USB storage device 5. 0 Main Menu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TroubleShooting A. 2 Technical Specifications 2 2 3 3 3 3 3 3 4 4 4 4 5 5 5 5 5 5 6 7 8 9 10 10 10 11 11 11 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC, RoHS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. 02/2010 per March 2010 * €0, 14/Min. [. . . ] Use 2. With the pq buttons select Auto Scan, press OK to enter the menu. 3.  Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. 1.  Use the pq buttons to select Installation, press OK to enter the menu. 2.  With the pq buttons to select Channel Scan and press OK to enter the menu. 3.  Use the tu buttons to select one of two Scan Modes – By Channel and By Frequency. 4.  When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, 5. 2. 2 Channel Scan 6 PART 1 • English highlight Search and press OK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5. 2. 3 Antenna Setting 5. 2. 4 Logical channel numbering If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5. 3 Setup This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. 1.  Press pq buttons to highlight desired menu and press OK button to enter the setting menus. Then press pq buttons to select desired item. Settings can be changed by pressing tu buttons. You can get better overview if press OK first. Now you can select desired setting by pq buttons and confirm it with OK. 2. Press EXIT button to exit. 5. 3. 1 OSD Language 5. 3. 2 TV System This menu allows you to set OSD Language. This menu allows to setup different settings concerning your TV set. Display Mode: PAL/NTSC/AUTO Aspect Ratio:  this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Use Screen)and AUTO. Video Output:  Switch the video output mode either to RGB or to CVBS RF System:  Use this option to set the mode for the modulator output to PAL-BG, PAL-I, PAL-DK, or NTSC. RF Channel:  Use this option to select the RF channel for the modulator. Please choose a channel which is not already being used by a local broadcaster or by other equipment in your home to prevent interference. Loop through:  Use this option to set the preferred loop-through mode: Running mode:  loop-through will be switched off when the receiver is in standby mode. [. . . ] 1.  Stepping through the channel list To move through the channel list, press the pq buttons on the remote control. 2.  Selected by number Enter the channel number directly by pressing numeric buttons, and press the OK button to select desired channel. 3.  Selected by on-screen channels list You can also select the required channel directly from on-screen channel list. This is displayed using the receiver’s main menu. [. . . ]