User manual STRONG SRT 8150

[. . . ] Digital High Definition Terrestrial Receiver SRT 8150 User Manual Picture similar Fig. 3 Fig. 4 PART 1 · English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 YOUR RECEIVER 2. 1 Front Panel 2. 2 Rear Panel 2. 3 Remote Control Unit 3. 0 CONNECTIONS 3. 1 Connecting to Terrestrial antenna 3. 2 Connecting to TV & VCR 3. 3 Connecting to Digital Audio Amplifier 3. 4 Connecting to computer by serial cable 3. 5 Connecting to external USB Hard disk 4. 0 STARTING UP FOR THE FIRST TIME 4. 1 Language Selection 4. 2 Terrestrial Settings 5. 0 MAIN MENU 5. 1 Channel Organizer 5. 2 Terrestrial Search 5. 3 Installation 5. 4 Timer 5. 5 Application 6. 0 OTHER OPERATIONS 6. 1 Program Guide (EPG) 6. 2 Zapping and information banners 6. 3 Channel list and view mode 6. 4 PDR functions A. 1 TROUBLESHOOTING A. 2 SPECIFICATIONS 2 2 3 3 3 4 4 5 6 8 8 8 9 9 9 9 10 10 10 10 12 13 15 15 16 16 17 17 18 19 20 1 English PART 1 · English 1. 0 INTRODUCTION 1. 1 Safety Instructions Grounding, Polarization -- If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced n Protecting the Power Cord -- The power supply cord should be placed so it will not bewalked on. [. . . ] n Manual Search Select one or several frequencies by OK button then Manual Scan (GREEN button) to search for channels on selected frequencies. n AutoScan Press Auto Scan (RED) to scan all frequencies in the list. On completing the search, the receiver will save automatically the services information. 5. 2. 2 Terrestrial settings Use pqtu buttons to select your Country, Antenna Supply and Channel Numbering. n Country: With OK you can open the list to select your home country. n Antenna Supply: Select this option to ON in case you use active antenna powered through coaxial cable. The receiver supply DC power +5 V into 50 mA load maximum. n Channel Numbering: select this option to "Operator defined" in case your operator provide logical channel numbering feature. Otherwise select "Appearing order". 12 PART 1 · English 5. 3 Installation 5. 3. 1 Preference In this menu, you can set up your personal preferences. n OSD language, Audio language, Subtitle language Use pqtu buttons select the item and OK button to display the list. n Banner Timeout To set banner duration (how long information banner will be displayed on screen). Use pqtu buttons select the item and OK button to display the list. n Transparency Use pqtu buttons to select the transparency level and OK button to display the list. n CAM messages To enable or disable displaying of messages from Conditional Access Module. Disabling of CAM messages could be necessary in order to not disturb you while zapping through channels which can't be descrambled by your smart card. n Power On Channel Use pqtu buttons to select the item. If your choice is Fixed channel: press OK button to display a channel list, select a channel and confirm selection with OK button. Your receiver will always start with defined channel. If your choice is Last Viewed then receiver will awake with the last watched channel. n S/PDIF Use pqtu buttons to select the Digital audio mode. PCM ­ the receiver will downmix AC3 audio to PCM stereo. Dolby ­ the receiver will by-pass AC3 audio for future decoding by Digital Audio Amplifier. [. . . ] Set the values channel parameters correctly in installation menu. Press TV/Radio to get back to TV channels. Check whether the batteries are inserted correctly in your remote control. Check the batteries, and if exhausted replace the batteries in the remote control. 19 English PART 1 · English A. 2 SPECIFICATIONS Demodulator DVB-T Modulation: Demodulation: IF bandwidth: Guard Interval: Code rate: Video Decoder Profile Level: Input Rate: Aspect Ratio: Frame Rate: Video Resolution: Audio Decoder Audio Decoding: Audio Mode: Frequency Response: Sampling Rate: Tuner DVB-T Connector type: Frequency Rage: Signal Level: COFDM Spectrum: Antenna supply: System & Memory CPU: Flash Memory: System Memory: A/V Memory: COFDM QSPK, 16-QAM/ 64-QAM 6, 7 or 8 Mhz 1/4, 1/8 1/16, 1/32 1/2, 2/3, 3/4, 5/6, 7/8 MPEG-2 MP@ML, MP@HL, MPEG-4 H. 264/AVC Max. [. . . ]