User manual STRONG SRT 900 BROCHURE

[. . . ] Any noticed dammage will invalidate the warranty conditions of your equipment. Installation - Ensure that the voltage from the mains in your room complies with that indicated on the back of your set (identification label, screen marking, etc. ). Do not connect an AC or DC power supply other than that from the mains. Ensure that the electric plug is fully connected into the wall socket. [. . . ] Radio Zapping: Press PR- / PR+ (or V/W) keys to select the previous / next Radio channel in the list. The C and B buttons allow you to navigate through previous / next pages of the Radio list. The digit buttons of your remote control unit allows you to directly access to any Radio channel number. Enter the channel number (3 digits maximum) of the desired service. !If the requested Radio channel number does not exist, the lower nearest one is selected. !If you have defined Radio favorites lists, the name of the current Radio favorite list is displayed at the top left of the screen. The OPTIONS key allows you to change your current Radio favorite list. Press EXIT to return to the last TV channel. 18 Day to day use Zapping Banner / Extended Information banner You can get two levels of information related to the current played event. · TV banner basic channel information, · Extended event description. The Basic channel information is displayed through a Zapping Banner that is either shortly displayed after each Zapping or by pressing the INFO key. EN !Press OK on the remote control unit to display the full size video of the selected service on TV screen. Press EXIT or BACK on the remote control unit to exit the TV Miniguide. 21 Day to day use TV Channel list Direct access from any TV channel: Press the GUIDE key once to display the TV Channel list. !Pressing the GUIDE key for more than 2 seconds gives access to the TV Miniguide. Press V/W keys to select the previous / next TV channel in the list. The C and B buttons allow you to navigate through previous / next pages. Press OK on the remote control unit to display the selected channel on TV screen. Press EXIT or BACK on the remote control unit to exit the TV Channel list. Programm Guide Press GUIDE key on the remote control or select Programme Guide field in the Main menu and press OK. Once you have press OK, you enter the Viasat portal of applications. Through this portal, you can access and navigate into the following applications: - EPG (Electronic Program Guide), - Weather forecast, - Games, - News, - Music guide, - Pay-Per-View (Ticket). 22 Extra information Extra information Recording a digital satellite program If you have aVCR you can use it to record satellite programs from your set-top box. Make sure your set-top box is switched on and tuned to the channel you wish to record. Set your VCR correctly to record at the appropriate time, making sure your VCR is set to record its appropriate AV channel. For further information about your VCR, refer to your VCR's User Guide. [. . . ] Press BACK to return to Information menu or press EXIT to exit the menu. Signal Quality Select Signal Quality field in the Information menu and press OK, Signal Quality screen is displayed. This menu allows you to check the quality of the satellite signal received by your set-top box. Check that the signal is correct and press BACK to return to Information menu or press EXIT to exit the menu. 33 Solving problems Solving problems * Before you check connections between your equipment, make sure you disconnect all your equipment from the mains supply. [. . . ]