User manual STRONG SRT 4356

[. . . ] This receiver is of our latest development; it is designed to be compatible with new technologies by upgrading its software through the satellite and the Internet. It is highly recommended that you read this manual carefully to safely install your receiver to achieve its optimum performance. user Manual: Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 English Deutsch Italiano РуссκИЙ Specifications Warranty Certification 1. 0: Usage This user manual is applicable for Strong SRT 4356 PVR Evolution (Personal Video Recorder) Digital Satellite Receiver and its related accessories. [. . . ] Do not turn off your receiver while you are downloading new software. System Information: The system information displays information about your receiver such as model number, software and boot version. To check system information, apply the following steps: (Please see inside cover Screen 16) 1. select "System information" and press OK or the Right button. Factory Reset: Be careful when using this function, because it will erase all the data and parameters you may have set earlier to your receiver. Once you have made a Factory Reset you will have to re-install your preferences and re-scan your channels. To reset your receiver to factory default, apply the following steps: 1. The receiver will reset itself to the original factory settings. Note: Your PIN code will change back to the factory setting "1234". 2 LNB Set-up (Please see inside cover Screen 17) It is recommended that you read the manual and installation instructions of your LNB, your DiSEqC switch, your 0/12V switch and your Positioner before you start setting up your LNB. To set up your LNB, please apply the following steps: 1. Using UP/DOWN keys, select "Installation" and press OK. Using UP/DOWN keys, select "LNB Set-up" and press OK. Check the exact specifications of your LNB through the manufacturers information or your dealer. there are up to 16 types of LNB's available. The Default is set to Universal mode (9750/10600MHz), DiSEqC is not used and the LNB is mounted on a fixed dish. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT buttons to set up any values. LNB: Up to 16 LNBs are available, select the correct one according to your LNB specifications. LNB Type: Select the LNB type from Universal 1 - 3, and Single. You should type the LNB value in Single. In Single, the item parameter is 0 or another number. in UNI 1-9750/10600 MHz , UNI2-9750/10700MHz , UNI3 9750/10750 MHz LNB Power: Select 13/18V , 13V or 18V for LNB. [. . . ] For your benefit, we recommend that you record your serial number, found on the back of your receiver, and other purchase information on this card. Make a copy of this certificate and keep it with your personal records, along with your proof of purchase. This information will allow us to better serve your needs. Strong grants you a warranty of 12 month* from the date of purchase. [. . . ]