User manual STRONG SRT 5510

[. . . ] Digital Interactive Terrestrial mhp Receiver SRT 5510 MHP User Manual Picture similar PART 2 • English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 CONNECTIONS 2. 1 Connection to Terrestrial Antenna 2. 2 Connecting to TV & VCR 2. 3 Connecting to a Digital Audio Amplifier 2. 4 Connecting to PC 3. 0 YOUR RECEIVER 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 4. 0 STARTING UP 4. 1 Language Setting 4. 2 Channel Setting 5. 0 USAGE 5. 1 Your Guide 6. 0 YOUR PREFERENCES 6. 1 Display options 6. 2 Language options 6. 3 Sort Channels 6. 4. Timer 7. 0 INSTALLATION 7. 1 System Setup 7. 2 PIN Changing 7. 3 Channel Search 7. 4 Time Setup 7. 5 Factory Settings 7. 6 Internet Setup 8. 0 DECODER STATUS 8. 1 Signal level 8. 2 System Info 8. 3 Decoder Upgrade 8. 4 Loader Status 8. 5 Help A. 1 TECHNICAL SPECIFICATIONS A. 2 TROUBLESHOOTING 2 2 2 3 3 4 4 4 4 4 4 4 5 6 7 7 7 8 9 10 10 10 10 10 11 11 11 12 12 12 12 13 13 13 13 13 13 14 15 English 1 PART 2 • English 1. 0 1. 1 INTRODUCTION Safety Instructions DO NOT INSTALL YOUR RECEIVER: n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a surface which might obstruct the ventilation slots. DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: n To direct sunlight or near any other equipment that generates heat; to rain or intense moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc. It may cause a fire or an electrical shock. [. . . ] The receiver will start an automatic channel scan to find the DVB-T channels that are available in your area. Update: This function allows to re-allocate the channels list and to add channels without modifying the positions of the actual channels. In case of first time installation this function involves as function “First Installation Search”. Add One Channel: This function allows searching for specific channels and frequencies. This is an option recommended for experienced users who know the channel number, frequency and the bandwidth. Type in the frequency with the numeric keys. Select “Bandwidth” by pressing pq and the bandwidth by pressing tu and press OK to start searching. Then the channel which is programmed on position 1 will be seen. In the event, that no channel could be found, change the direction of your antenna and repeat “Install”. 7 PART 2 • English 5. 0 USAGE In the main menu you’ll find all important settings and functions. You get there by pressing the MENU button on your remote control. By pressing BACK you’ll always get back to the previous menu. Your Guide TV Channels Radio Channels Application Channels Stored Services Program Guide Your Preferences Display options Time and Date Channel Number Channel Banner Timeout Volume Bar Application Autostart Language options On-Screen Language First Audio Language Second Audio Language First Subtitle Language Second Subtitle Language Dolby Digital Sort channels TV Channels Radio Channels Application Channels Timer Enable Timer Channel List Channel Name Start Date Start Time End Time Frequency Installation (PIN Input necessarily) System Setup TV Aspect Ratio Display Format TV SCART Output VCR SCART Output Amp. Power OTA in standby Chance PIN Code 8 PART 2 • English Channel Search Install Update Add One Channel Time Setup Factory Settings Internet Setup Decoder Status Signal Level System Info Decoder Upgrade Loader Status Help Using Your Box Using Your PIN MHP Software Update 5. 1 Your Guide 5. 1. 1 TV Channels Select “TV channels” with the buttons pq and press OK. Select a channel with the buttons pq and press OK. 5. 1. 2 Radio Channels Select “Radio Channels” with the buttons pq and press OK. Choose the channel with the buttons pq and press OK for confirmation. 5. 1. 3 Programme Guide (EPG) EPG (Electronic Program Guide) is transmitted by broadcasters to display information about program content. Select “Programme Guide” with the buttons pq and press OK. To access the EPG function directly during TV/Radio, press the key EPG on your remote control. It will open the EPG which contains the following information: Actual date and hour Actual programme n Actual and following programs (if available) n Title of the programme (if available) n n For scrolling, use pq. You’ll see start/end time and title of programme. Set “Enable Timer” with the tu keys to “active” and move with the pq keys up and down. [. . . ] If you select “Ethernet” by pressing OK you can set the configuration to “Automatic” or “Manual” mode. Using “Manual” you need to type in several IP numbers. Move with the pq keys to the following items: IP-Number, Mask, Gateway, Primary DNS and Secondary DNS. Use the numbered keys for typing the IP numbers. [. . . ]