User manual STRONG SRT 6130

[. . . ] SAT OUT SAT IN PART 1 • English Thank you for choosing this Strong satellite receiver. This receiver is of our latest development and it is designed to be capable of safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6130 Digital Satellite Receiver and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] To set the time, apply the following steps <Please see inside cover Screen 15>: 1. Select “Time Settings” and press OK or the Right button. Select Time Zone: Press OK or the Right button, and a list of the GMT plus or minus the hours you need for your country is displayed. Using UP/DOWN keys select the correct one, and the receiver will automatically show the current time in your country. To set the time manually: Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT usage to “off”. The time setting menu will now activate the bottom two fields of the menu. Select Set Local Time: Press OK or the Right button. Use your UP/DOWN buttons or Numeric buttons [0-9] to set the local time. When set, press OK to save the local time. Select Set Date: Press OK or the Right button and set the date the way you have set the time. 13 PART 1 • English 2. Press the BACK button until you go back to the Main Menu. Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps <Please see inside cover Screen 16>: 1. Select Power on Channel and press OK or the Right button. Last Viewed: The receiver will start-up with the channel that you viewed before turning the receiver off. Define Channel: This function allows you to set the channel you want when the receiver turns on. To define the channel, apply the following steps: 1. Press OK or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start-up with. System Upgrade: You can download the latest software available including new technologies to your receiver. To upgrade your system, apply the following steps: 1. Select “System Upgrade” and press OK 2. A system upgrade is available on ASTRA and on HOTBIRD. [. . . ] Wrong parameters set in the Check settings in LNB- and Channel set up menu The receiver displays the message “No or Bad signal” menu. Ask your dealer to check the outdoor unit and antenna cable to LNB The receiver displays the message “No or Bad signal” The RED and Green lights on Overload of the maximum the front panel of your receiv- available LNB power. (Short circuit in the LNB cable) er are blinking The remote control is not working The batteries of the remote control are not inserted or exhausted Disconnect the 220V main power and ask your dealer to check the LNB cable Check whether the batteries are inserted correctly in your remote control. Check the batteries, and if they are exhausted, replace them 20 PART 1 • English A. 2 Glossary of terms C band DiSEqC EPG 3. 7 ~ 4. 2 GHz Frequency. [. . . ]