User manual STRONG SRT 6200

[. . . ] Digital Satellite Receiver SRT 6200/SRT 6202/SRT 6205 User Manual 1. 00 SRT 6202/6205 SRT 6205 Picture similar PART 1 · English TAblE of ConTEnTS 1. 0 InTRoDUCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 YoUR RECEIvER 2. 1 Rear Panel 2. 2 Remote Control Unit 2. 3 Default PIN code: 0000 3. 0 ConnECTIonS 3. 1 Basic connection with SCART cable 3. 2 Connecting to Satellite Dish 3. 3 Connecting USB device 4. 0 STARTIng UP 4. 1 Language Selection 4. 2 Select Satellite 4. 3 Antenna mode 5. 0 MAIn MEnU 5. 1 Channel Organiser 5. 2 Installation 5. 3 System setting 6. 0 WATChIng Tv AnD lISTEnIng To ThE RADIo A. 1 TRoUblE ShooTIng A. 2 SPECIfICATIonS 2 2 2 3 3 3 3 3 4 5 5 5 5 5 5 5 5 6 6 6 7 8 11 13 14 STRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RohS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line 1 English PART 1 · English 1. 0 InTRoDUCTIon 1. 1 Safety Instructions Do noT InSTAll YoUR RECEIvER: n a closed or poorly ventilated cabinet; directly on top of or under any other equipment; In on a surface which might obstruct the ventilation slots. [. . . ] TV mode Press oK or u to select mode and oK to confirm. If you don't know your TV's standard, select AUTO. Screen mode Press oK or u to select 4:3 or 16:9 and oK to confirm. Video output Press oK or u to select CVBS or RGB and oK to confirm. Modulator settings* Use pq to select RF Audio mode or RF channel. Use tu to change the settings and press oK to confirm or EXIT to cancel the settings. * only SRT 6205 5. 3. 1. 3 Time Settings If a broadcaster provides GMT, you can set the time using GMT or set the time manually. If the GMT usage is ON, you need to set the Time Zone. If you set GMT Usage to OFF, Set Data and Set Time are displayed. To set the time value manually, move the cursor to the time item and use the numeric buttons on the remote control. 8 PART 1 · English 5. 3. 1. 4 Auto Standby This option allows you to set the desired Auto Standby time or to disable Auto Standby. Auto Standby will switch the receiver to standby automatically when it doesn't receive commands from the remote control for a given period of time. Possible settings are: 1~6 Hours and Disable. The default setting for Auto Standby is 3 hours. To avoid the automatic switch off, set Auto Standby to Disable. 5. 3. 1. 5 Set factory Default Please be careful when using this function, as it will erase all the data and parameters you may have set earlier. Once you set the factory default you will have to re-install your preferences and re-scan channels. To reset your receiver to factory default, apply the following steps: Select Set Factory default and press oK. Confirm the warning message with oK and press oK. The receiver will return to its factory default state and all user data will be deleted. note: IYour PIN code will change back to the factory setting "0000". 5. 3. 2 oSD Style Use this menu to set the Menu Colour, Transparency Level and Border Pattern. 5. 3. 3 Parental Control Use this menu to set Channel lock status (ON or OFF), the Menu lock status, Parental setting and Change PIN code. Channel Lock Set the system channel lock to ON or OFF. If lock is ON, a locked channel can only be watched after entering the parental PIN. Menu Lock Press oK to select whether the menu should be locked or not (YES or NO) and press oK to confirm. [. . . ] Press 3 to stop. 6. 9 Playback of records From no menu state press Play button to display list of records. Select the record you want to playback with pq and press oK twice. Press II to pause the playback, to resume playback press again. A. 1 TRoUblE ShooTIng There may be various reasons for occurring abnormal operation of the receiver. Check the receiver according to the procedures shown below. [. . . ]