User manual STRONG SRT 8105 ECO

[. . . ] Digital High Definition Terrestrial Receiver SRT 8105 ECO User manual Picture similar PART 1 • English Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control  3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with Cinch cable 3. 5 Connecting to a Digital Audio Amplifier with S/PDIF 3. 6 Connecting to a Digital Audio Amplifier and TV using HDMI  3. 7 Connecting a USB storage device 4. 0 Starting up for the first time  5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Time Shift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel  7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media+  8. 0 Troubleshooting 9. 0 Technical Specifications STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 2 2 2 3 3 3 3 3 3 4 4 5 5 5 5 5 5 5 6 6 7 7 7 8 8 8 8 8 8 9 9 9 11 12 14 15 15 18 19 18 Jan 2012 17:30 1 English PART 1 • English 1. 0 Introduction 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: „„ a closed or poorly ventilated cabinet; directly on top of or under any other In equipment; on a surface which might obstruct the ventilation slots. [. . . ] Select Yes to save the changes or No to discard. 7. 1. 1. 4 Moving channels To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Move function is selected. Use p/q to select the desired channel and press OK to select it. You can now move the selected channel up or down the channel list using p/q. Once the channel is on the desired position, press OK again. The channel is now fixed on its new position. Once all changes are made, press EXIT twice. Select Yes to save the changes or No to discard. 7. 1. 1. 5 Editing channels The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit menu, press BLUE while in TV Channel List. Use p/q to select the desired sorting method and press OK to confirm. Possible methods are: Name (A-Z): Sorting in alphabetical order from A to Z. Name (Z-A): Sorting in alphabetical order from Z to A. First in the list will be Free-To-Air channels. Free/Scramble: Lock: All unlocked channels will placed first in the list. Default: Sorting by searched Order (from lowest to highest frequency or by LCN numbering). Rename Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to indicate that Rename is selected. Use p/q to highlight the desired channel and press OK to select it. A text field will now pop up at the right of the screen. Use t/u p/q to select the desired characters and enter them with OK. Once you have finished editing, press BLUE to enter the changes. Once all changes are made, press EXIT twice. [. . . ] Press EXITE to save the settings and quit the menu. 7. 6. 2 Record Manager This option shows relevant information about the connected USB device. Select DVR HDD Information from the Media+ menu and press OK to enter. Press EXIT to leave. 7. 6. 3 DVR HDD Information 7. 6. 4 HDD Format Warning: The HDD format menu allows you to format the connected USB device. Formatting will permanently delete ALL data stored on the connected device. [. . . ]