User manual STRONG SRT 8106

[. . . ] Digital Terrestrial HD Receiver SRT 8106 User manual Picture similar PART 1 • English Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with Cinch cable 3. 5 Connecting to a Digital Audio Amplifier with S    DIF /P 3. 6 Connecting to a Digital Audio Amplifier and TV using HDMI 3. 7 Connecting a USB storage device 3. 8 Connecting to a TV using modulator output 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Time Shift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media+ 8. 0 Troubleshooting 9. 0 Technical Specifications STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 2 2 2 3 3 3 3 3 3 4 4 5 5 5 5 5 5 6 6 6 6 7 7 8 8 8 8 9 9 9 9 9 9 11 12 14 16 16 18 19 14 Mar 2012 18:16 1 English PART 1 • English 1. 0 Introduction 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: „„ a closed or poorly ventilated cabinet; directly on top of or under any other In equipment; on a surface which might obstruct the ventilation slots. [. . . ] Once the channel is on the desired position, press OK again. The channel is now fixed on its new position. Once all changes are made, press EXIT twice. Select Yes to save the changes or No to discard. 7. 1. 6 Editing channels 10 The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit menu, press BLUE while in TV Channel List. The Edit Channel menu will appear. PART 1 • English Sort Press RED to enter the Sort menu. Use pq to select the desired sorting method and press OK to confirm. Possible methods are: Name (A-Z): Sorting in alphabetical order from A to Z. Name (Z-A):  Sorting in alphabetical order from Z to A. Free/Scramble:  First in the list will be Free-To-Air channels. Lock:  unlocked channels will placed first in the list. All Default:  Sorting by searched Order (from lowest to highest frequency or by LCN numbering). Rename Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to indicate that Rename is selected. Use pq to highlight the desired channel and press OK to select it. A text field will now pop up at the right of the screen. Use tu pq to select the desired characters and enter them with OK. Once you have finished editing, press BLUE to enter the changes. Once all changes are made, press EXIT twice. Select Yes to save the changes or No to discard. Delete Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate that Delete is selected. [. . . ] Select HDD Format from the Media+ menu and press OK to enter. Use tu to select the partition you wish to format (Partition 1 is set per default) and press q to highlight Format. Press OK to proceed, select Yes or No, or press EXIT to leave without formatting. NOTE:  is possible to use already NTFS formatted USB disks. [. . . ]