User manual STRONG SRT 8110

[. . . ] Digital High Definition Terrestrial Receiver SRT 8110 User Manual Picture similar PART 1 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 2. Your Receiver 2. 1 PIN code default: 8888 2. 2 Front panel 2. 3 Rear panel 2. 4 Remote Control 2. 5 Installing the Batteries 2. 6 Using the Remote Control 3. 0 Connections 3. 1 Connecting to TV Set 3. 2 Connecting to Digital Audio Amplifier, DVD/Video recorder 4. 0 First Time Installation 5. 0 Basic Operations 5. 1 Program 5. 2 Video Setting 5. 3 Channel Search 5. 4 Time Setting 5. 5 Option 5. 6 System Setting 5. 7 USB 6. 0 Recording function A. 1 Troubleshooting A. 2 Specifications 2 2 3 3 3 4 4 4 4 4 5 5 5 5 5 5 6 6 7 7 8 8 9 9 11 11 12 English per June 2010 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RoHS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. [. . . ] 2. Repeat the previous step to skip more programs. 3. To confirm and exit the menu, press EXIT. Disable a skipped TV or Radio programme Press the GREEN button on the programme marked with the skip symbol. Move a TV or radio programme 1. Select the preferred programme then press the RED button. 2. Press pq to move the programme 3. Press OK to confirm 4. Repeat the above steps to move more channels Lock programme You can lock selected programmes for restricted view. Lock a TV or Radio Programme: 1. Select the preferred programme then press the YELLOW button. 2. Repeat the previous step to select more programmes 3. To confirm and exit the menu, press EXIT. To view the locked programme, you need to enter either the default password ‘8888’ or your last set password. We recommend changing of your password from default to any of your preference. Disable a locked TV or Radio programme Press the YELLOW button on the programme marked with the lock symbol. 6 PART 1 • English 5. 1. 2 EPG (Electronic Programme Guide) The EPG is an on-screen TV guide that shows the program schedule for up to seven days in advance for every tuned channel. Use pq to select the preferred programme. If there is more than one page of information, use the BLUE button for page up and the YELLOW button for page down. To view program schedule on other channels use tu buttons. To book reminder for desired event press OK button. To display a list of booked events press INFO button. You will find more details about the booking of reminders in chapter 5. 4. 1 Schedule. 5. 1. 3 Sort Sort your channels from the following options: By LCN Sort the channels in channel number order (ascending) By ONID Sort the channels in order of Network ID (Broadcaster ID) By Service Name Sort the channels in alphabetical order Service ID Sort the channels according to the station 5. 1. 4 LCN (Logical Channel Numbering) Set LCN ON or OFF. 5. 2 Video Setting Press MENU then select Picture. The menu provides options to adjust the video settings. Press pq to select an option and press tu to adjust the setting. Aspect Ratio You can set the display format to either 4:3 PanScan, 4:3 Letter Box, 16:9 Full Screen or Auto to get the maximum display when watching TV. Tip:  can change the video output format directly from view mode by pressing the YELLOW button on the you remote control. Resolution If the video does not appear correctly, change the setting. [. . . ] You will need to confirm format by pressing OK button one more time. Format procedure will take some time, depends from size of storage device used. At the end of process “Format is complete” message will appear. Warning:  Format functions will delete all records, data and information from your USB device. [. . . ]