User manual STRONG SRT 8526

[. . . ] Digitalni zemaljski HD prijemnik SRT 8526 Priručnik za uporabu User Manual USB snimanje HD programi Ručn. / Auto TV Info Pretraga liste favorita 4 Digitalni zvuk 30 Podsjetnika Titlovi MP3/JPG MPEG Simulacija slike PART 2 • English Table of Contents 1. 0 INTRODUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your receiver 2. 1 Front panel 2. 2 Rear panel 2. 3 Remote control 2. 4 Installing the batteries 2. 5 Using the remote control 3. 0 Connections 3. 1 Connecting to your aerial antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with cinch cable 3. 5 Connecting to a digital audio amplifier 3. 6 Connecting to a digital A/V receiver and TV using HDMI 3. 7 Connecting an external USB storage device 4. 0 Starting up for the first time 4. 1 Antenna Adjustment 5. 0 Quick guide to using your receiver 5. 1 Changing channels 5. 2 Adjusting volume and audio 5. 3 Info Banner 5. 4 Electronic TV Programme Guide (EPG) 5. 5 Selecting subtitle language 5. 6 Displaying Teletext 5. 7 Using external USB storage devices 5. 8 Instant Recording 5. 9 Playback of recording 6. 0 Main Menu 6. 1 Programme Organizer 6. 2 Channel search 6. 3 System Setup 6. 4 Tools 6. 5 Records 6. 6 Multimedia 6. 7 Irdeto CA Status 7. 0 Troubleshooting 8. 0 Technical specification 9. 0 Appendix 18 Sep 2012 15:53 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Irdeto is a registered trademark of Irdeto Access BV. All other product names are trademarks or registered trademarks of their respective owners. [. . . ] By Frequency: The channels will be sorted in ascending order of the frequency in which they are broadcasted. By Operator: The channels will be sorted by the operator ID. 6. 1. 3 Delete All Use this menu carefully!It will delete all of the stored channels and settings!To execute this function it will be requested to enter the PIN code (DEFAULT PIN: 0000). After you have performed this action you will be guided to the Installation Guide again!Warning: The Delete all function will permanently delete all of the stored channels and settings from your receiver! 6. 2 Channel search In the menu Channel Search you can adjust your search settings and perform an automatic or manual channel search. Press MENU and use tu to select Channel Search, then press OK. Following submenus will be displayed: Search Setup, Auto Search and Manual Search. Use pq to select a submenu and press OK or u to access. 12 PART 2 • English 6. 2. 1 Search Setup In the menu Search setup you can set the antenna power and the country in which you live. Country: Use the tu buttons to change the country. Antenna Power: If you use an antenna that can be amplified (i. e. an active indoor/ outdoor antenna) and it requires a voltage of 5 V and doesn’t consume more than 60 mA, then you can set the antenna power to On. If you use an antenna without an amplifier or your antenna is already amplified by an external power supply or if you use an antenna from a house distribution system, please keep the antenna power Off. 6. 2. 2 Auto Search After selecting this menu item and pressing OK you will be asked to enter the PIN code (DEFAULT PIN: 0000) in order to update the current channel list. If you don’t want to perform a full channel scan you can press EXIT to cancel. After entering the PIN code (DEFAULT PIN: 0000) the receiver will perform an automatic channel search through all frequencies and after finishing this process it will update the channel list. During the search process the receiver will display the progress bar, the currently scanned frequency and the channel names. The receiver will add all new found channels to the channel list. 6. 2. 3 Manual search In this menu you can search for channels on a specific frequency or channel. This menu requires knowledge of some parameters in order to search on the correct channel/frequency in your area. Scan mode: Use tu to choose between By Channel and By Frequency. [. . . ] is noisy or A/V The antenna is damaged or Check the antenna and cables. disappears covered by ice (winter time). from time to Damaged cable from antenna to time receiver. The indoor antenna has been Setup the antenna at a better position. [. . . ]