Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual STUV 16-H. We hope that this STUV 16-H user guide will be useful to you.
Lastmanuals help download the user guide STUV 16-H.
Detailed instructions for use are in the User's Guide.
[. . . ] Read the installation instructions and directions for use before installation and actual usage. this accessory (base) has been designed for the Stûv 16-cube only. The guarantee only covers damage incurred during transport if it is reported within 48 hours of delivery and a complaint is made upon receipt. [. . . ] 1 base (for 16/58 : ref 13010012, for 16/68 : ref 13010013, for 16/78 : ref 13010014) 4 x M6x16 screws with hexagonal head Optional : outside air inlet for 16-cube base : 1 air inlet duct 1 union 1 piece of flexible tubing 2 clamp collars 4 M4 nuts Using a size 3 Allen key, remove the plug from the air inlet and the flaps at the front and back of the support plate [photos 1 & 2]. These parts are not used in installation. remove the packaging from the base of the Stûv 16-cube [photo 3]. Using the screwdriver (T x 20 head), unscrew the base from the wooden palette [photo 4]. Put protection on the floor and turn the base on its back and screw the 4 adjustable legs tight to the base [photo 5]. Using a hammer, remove the lower or back plug from the base depending on the configuration required [photo 6]. do the same for the air inlet duct depending on the configuration required [photo 7]. Put the base into its definitive position. Feed the flexible tubing of the air inlet into the hole in the base [photo 8]. Using the size 7 key, screw the collar to connect the unit [photo 9]. In case of back airflow, recover the cap you removed from the base in item [6], and put it on the precut at the base's bottom (between the channel and the base). Ensure the union, which fits into the duct, is fully inserted [photo 11]. Attach the duct using the 4 M4 nuts [photo 12]. Unless already done, put the base on its feet. Check the safety distance from combustible materials. For the distance at the front, refer to the installation instructions for the Stûv 16-cube. [. . . ] Using a size 10 key, screw the back of the base to the stove from inside the base [photo 5]. Adjust the front if necessary and screw in the front of the base, again from the inside of the base. Com installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalación | instalação | instalace | installation | installatie | installazione | instalaciónand | instalace | installation installatie | installazione | instalación Stûv stoves are designed | instalação Stûv reserves the right to make| changes without prior notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STUV 16-H
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual STUV 16-H will begin.
