User manual SUPERMICRO MBD-X8DTH-6F-O

[. . . ] This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ] LAN 1 Enable KB/MOUSE FAN5 P1-DIMM3A P1-DIMM3B USB 0/1 IPMI LAN FAN6 P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B CPU2 FAN7 CPU1 Fan JPI2C1 JPW1 JPW2 JPW3 FAN1 B. LAN 2 Enable COM1 VGA PHY LE1 LAN1 CP CPU1 P2-DIMM1B P2-DIMM1A LAN2 P2-DIMM2B P2-DIMM2A FAN8/ CPU2 Fan SLOT7 PCI-E 2. 0 X8 P2-DIMM3B P2-DIMM3A JOH1 JD1 FAN3 SP1 SIO FAN2 X8DT6/E Series Rev. 2. 01 LAN CTRL JPL1 A SLOT6 PCI-E 2. 0 X8 Intel 5520 LAN CTRL BIOS SLOT4 PCI-E 2. 0 X8 JPL2 B JBT1 Intel ICH10R South Bridge TPM JP7 LED1 J5 SAS0~3 SLOT3 PCI-E 2. 0 X4 BMC CTRL Battery LSI 2008 JIBTN1 SAS CTRL SAS4~7 D1 T-SGPIO1 SLOT1 PCI-E X4 JI2C2 JI2C1 JPB JPG1 COM2 USB6/7 USB4/5 USB3 USB2 I-SATA4 I-SATA3 I-SATA1 I-SATA0 JWF1 JWD JL1 JPS1 2-31 FAN4 JWOL T-SGPIO2 I-SATA5 I-SATA2 FLOPPY SLOT5 PCI-E 2. 0 X8 IOH JF1 X8DT6/MBD-X8DTH-6F-O/X8DTE/X8DTE-F User's Manual 2-8 Onboard LED Indicators Activity LED Link LED GLAN LEDs Two LAN ports (LAN 1/LAN 2) are located on the IO Backplane of the motherboard. The yellow LED indicates activity, while the Link LED may be green, amber or off to indicate the speed of the connections. See the tables at right for more information. Off Green Amber Rear View (when facing the rear side of the chassis) LAN 1/LAN 2 Activity LED (Left) LED State Color Yellow Status Flashing Definition Active LAN 1/LAN 2 Link LED (Right) LED State LED Color Definition No Connection or 10 Mbps 100 Mbps 1 Gbps IPMI Dedicated LAN LEDs (MBD-X8DTH-6F-O/ X8DTE-F Only) In addition to LAN 1/LAN 2, an IPMI Dedicated LAN is also located on the IO Backplane of the MBD-X8DTH-6F-O/X8DTE-F. The amber LED on the right indicates activity, while the green LED on the left indicates the speed of the connection. See the tables at right for more information. IPMI LAN (F models only) Link LED Activity LED IPMI LAN Link LED (Left) & Activity LED (Right) Color Link (Left) Activity (Right) Status Green: Solid Amber: Blinking Definition 100 Mbps Active A. LAN1/2 LEDs KB/MOUSE FAN5 P1-DIMM3A P1-DIMM3B USB 0/1 IPMI LAN FAN6 JPI2C1 JPW1 JPW2 JPW3 FAN1 B. LAN3/4 LEDs (X8DT6/iLN4) C P1-DIMM2A P1-DIMM2B P1-DIMM1A P1-DIMM1B CPU2 FAN7 CPU1 Fan COM1 B. Dedicated LAN LEDs (MBD-X8DTH-6F-O/X8DTE-F) VGA PHY LE1 LAN1 CP CPU1 A B SLOT7 PCI-E 2. 0 X8 P2-DIMM1B P2-DIMM1A P2-DIMM2B P2-DIMM2A FAN2 LAN2 FAN8/ CPU2 Fan P2-DIMM3B P2-DIMM3A X8DT6/E Series Rev. 2. 01 SP1 LAN CTRL JPL1 FAN3 SLOT6 PCI-E 2. 0 X8 Intel 5520 LAN CTRL BIOS SIO SLOT4 PCI-E 2. 0 X8 JPL2 JBT1 Intel ICH10R LED1 J5 SAS0~3 SLOT3 PCI-E 2. 0 X4 BMC CTRL Battery South Bridge TPM JP7 LSI 2008 JIBTN1 SAS CTRL SAS4~7 D1 T-SGPIO1 SLOT1 PCI-E X4 JI2C2 JI2C1 JPB JPG1 COM2 USB6/7 USB4/5 USB3 USB2 I-SATA4 I-SATA3 I-SATA1 I-SATA0 JWF1 JWD JL1 JPS1 2-32 FAN4 JWOL T-SGPIO2 I-SATA5 I-SATA2 FLOPPY SLOT5 PCI-E 2. 0 X8 IOH JOH1 JD1 JF1 Chapter 2: Installation SAS Heartbeat LED Indicator An Onboard SAS LED is located on the motherboard. SAS 4~7 (X8DT6/ MBD-X8DTH-6F-O only) SLOT6 PCI-E 2. 0 X8 Intel 5520 LAN CTRL BIOS SIO SLOT4 PCI-E 2. 0 X8 JPL2 JBT1 Intel ICH10R LED1 J5 SAS0~3 FLOPPY SLOT5 PCI-E 2. 0 X8 IOH SLOT3 PCI-E 2. 0 X4 BMC CTRL Battery South Bridge TPM JP7 G LSI 2008 D1 T-SGPIO1 T-SGPIO2 SLOT1 PCI-E X4 JI2C2 JI2C1 JPB JPG1 F E D I-SATA5 I-SATA4 I-SATA3 USB2 JIBTN1 SAS CTRL SAS4~7 C B A JL1 JWD JPS1 FAN4 JWOL H I-SATA2 I-SATA1 I-SATA0 COM2 USB6/7 USB4/5 USB3 JWF1 2-36 Chapter 3: Troubleshooting Chapter 3 Troubleshooting 3-1 Troubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘Technical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter. Note: Always disconnect the power cord before adding, changing or installing any hardware components. Before Power On 1. Make sure that there are no short circuits between the motherboard and chassis. Disconnect all ribbon/wire cables from the motherboard, including those for the keyboard and mouse. Install CPU 1 first (making sure it is fully seated) and connect the chassis speaker and the power LED to the motherboard. (Check all jumper settings as well. ) No Power 1. Make sure that no short circuits between the motherboard and the chassis. Make sure that all jumpers are set to their default positions. Check that the 115V/230V switch on the power supply is properly set. Turn the power switch on and off to test the system. [. . . ] Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal errors will not allow the system to continue the boot-up procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs. A-1 BIOS Error Beep Codes BIOS Error Beep Codes Beep Code 1 beep 5 short beeps + 1 long beep 8 beeps 1 continuous beep (with the front panel OH LED on) Error Message Refresh Memory error Display memory read/write error System Overheat Description Circuits have been reset. [. . . ]