User manual SUPERMICRO X8DTL-6F

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbol for CLASS II (Double Insulation) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The important note is located on the rear of the cabinet. Laser Safety This unit employs a laser. [. . . ] Select "Recording" using [K \ L], then press [ENTER\OK]. Select "Dubbing Mode" using [K \ L], then press [ENTER\OK]. Option window will appear. · After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. Be advised to play back the tape until the picture is stabilised, then set the starting point at which you want to start recording, and start VCR to DVD duplication. · This unit will automatically stop the duplication if playback with no image detected for more than 3 minutes during VCR to DVD duplication. · If the playback sound mode of VCR is set to "STEREO", "LEFT" or "RIGHT", the sound mode upon dubbing is automatically switched to "STEREO". If the playback sound mode is set to "MONO", the sound mode upon dubbing is also "MONO". · If you set "External Input Audio" to "Stereo", the sound is recorded in "Stereo" (video mode, VR mode and +VR mode). · While in video mode or +VR mode, if you set "External Input Audio" to "Bilingual", the audio set in "Bilingual Recording Audio" mode is recorded. While in VR mode, if you set "External Input Audio" to "Bilingual", bilingual audio is recorded. · The main and sub audio will be simultaneously recorded (VR mode). You can select audio modes during playback. You cannot cancel finalising a DVD-R and DVD+RW/+R disc once it has started. Press [SETUP] to exit. Note · The Disc Protect setting is available only when a disc recorded in VR or +VR mode is inserted. · You can select only "Disc Protect ON A OFF" when a protected disc is inserted. To cancel the disc protect: · Select "Disc Protect ON A OFF" at step 3, then select "Yes". · If you insert a disc protected with this unit, "Disc Protect ON A OFF" will appear instead of "OFF A ON". 5 Finalising is complete. Note · Finalising a disc in video mode and +VR mode automatically creates a Title menu. · After you finalise the DVD+RW disc, you can call up the title list by pressing [TOP MENU], or you can call up the Title menu by pressing [DISC MENU]. · Even after DVD+RW disc is finalised, you can still record or edit. After you finalise DVD-RW/-R or DVD+R disc, you cannot edit or record anything else on that disc. · To release the finalisation of the disc, select "Undo Finalise" at step 3. · To release the finalisation of the DVD+RW disc, make an additional recording to the disc. · For DVD+RW disc, if you have added or deleted chapters, or made chapters hidden, you must finalise the disc before being able to see those effects on other units. To play back discs other than DVD+RW disc in other DVD players, you will need to finalise. [. . . ] (No area for new recording) Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) Recording Error You cannot record more than 254 chapters on one disc. [. . . ]