User manual SUPERTOOTH BUDDY

[. . . ] Then place your phone and the handsfree kit close to each other. From OFF, press and hold the On/Off (8) button of the handsfree kit until the Bluetooth Indicator (4) turns blinking red/blue. Then press the MFB (6) button to search your phone. Note: The handsfree kit will search only for 1 minute. [. . . ] Reject a Call (For Handsfree Profile Phones only): During the ring tone, press and hold the MFB (6) button for 3 seconds or short press the End/Reject (7) button. 6 Volume Setting: Increase or decrease the volume by pressing the Volume Up (2) or Volume Down (3) button. Press repeatedly until the desired level is reached. A beep will be heard as lowest and highest levels are reached. To transfer Audio from the Handsfree kit to the Phone: Simply turn off the handsfree kit by pressing the On/Off (8) button for 3 seconds and the audio will automatically be transferred to the phone. To Transfer Audio from the Phone to the Handsfree kit: Press the MFB (6) for 1 second and the audio will automatically be transferred to the handsfree kit. Note: For some phones, you may need to accept a connection prompt on the phone before automatic transfer takes place. To end the current call and accept the second incoming call Short press the MFB (6) button will end the current call and accept the second call. The audio for the second call will automatically be heard through the handsfree kit. Note: Call waiting is not available if two phones are connected (MultiPoint). The SUPERTOOTH BUDDY is active on both mobile phones. User actions (voice dial, redial) will control the primary phone, but an incoming call on any of the two phones can be accepted or rejected from the SUPERTOOTH BUDDY. Call waiting Important: Before using this feature, make sure that your phone and the phone network both support call waiting. If there’s a second incoming call, a beep will be heard from the SUPERTOOTH BUDDY. Turn off the handsfree kit by pressing and holding the On/Off (8) button until the LED flashes red. Pair the additional phone as explained in “Pairing to your Bluetooth Mobile Phone on section E”. This phone will now be the primary phone. Connect the 1st phone paired manually or turn the kit Off then On to connect both phones automatically. Note: Call waiting is not available if two phones are connected (MultiPoint). Switching Connections Between Paired Phones The SUPERTOOTH BUDDY always maintains a maximum of 8 phones in its memory. An additional pairing will automatically delete the phone that has not been used for the longest time. This phone needs to be paired again before it can be used. [. . . ] This product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and damage the product. Please contact the local recycling facility for removal of the battery. The embedded, non-replaceable battery is designed to last the life time of the product. For å hindre mulig skade på miljøet eller menneskelig helse fra ukontrollert avfallsavhending, vennligst atskill dette fra andre typer avfall og resirkuler det ansvarlig for å fremme bærekraftig gjenbruk av materielle ressurser. [. . . ]