User manual SUPERTOOTH LIGHT

[. . . ] The shaft will spring out from the body of the unit and fix in place. Power Off: Push the Microphone Shaft (5) inside the unit until it clicks. First Time Pairing to your Bluetooth Mobile Phone When you turn ON your Supertooth Light for the first time, it will automatically go into Pairing mode ready to be found by devices in Bluetooth searches. This will be the case until you have successfully paired a phone. If you have already paired a phone, please go to the next section. [. . . ] The last dialled number will be redialled. Reject a Call (For Handsfree Profile Phones only): During the ring tone, press End/Reject Button (2). Volume Setting: Increase or decrease the volume by pressing the Volume Up (8) or Volume Down (7) button. Press repeatedly until desired level is reached. This setting will be remembered by the kit. Audio Transfer (For Handsfree Profile Phones only): During an ongoing call, you can transfer the audio. Kit to Phone: Push in the Microphone Shaft (5) or turn off the kit. The audio will be transferred automatically to the phone. Phone to Kit: Press-and-release the Microphone Shaft (5) to turn the kit on. Note: Some phones do not connect automatically to the kit after turning on. With these phones, you need to press Accept Button (1) for 1 second to transfer the audio to the kit. Advanced Functions Multi-Pairing / Switching Connections Between Phones: The SUPERTOOTH LIGHT can connect to only one phone at a time, but will remember the Pairing information of 5 Bluetooth phones. Each additional pairing after 5 phones, will automatically delete the phone that has not been used for the longest time. Thus, the SUPERTOOTH LIGHT always maintains 5 phones in its memory. You can easily switch to any of the paired phones by: 1. Disconnecting the currently used phone using the "Active devices" in the Bluetooth menu of that phone. Connecting to the desired phone by using the "Paired devices" list in the Bluetooth menu of that wanted phone. Note: Reconnection to a paired phone may also be done by pressing the Accept Button (1). When you press the Accept Button (1), the SUPERTOOTH LIGHT will attempt to connect to the last used phone only. Therefore, it is recommended to connect to another paired phone using the phone's menu. Troubleshooting and Support Documents Phone/Device Software Please make sure you have the latest firmware upgrade for your phone, especially if you are using a PDA Phone. Go to the support section of the manufacturers' website to check you have the latest version. Many new mobile phones, pda's and computers phones require a Bluetooth patch to improve Bluetooth functionality from the original released version. Resetting Your Phone/Device Phones can become prone to software and memory issues which may cause Bluetooth reconnection problems. [. . . ] 18. 2 x 60. 2 x 122 Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 g Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. [. . . ]