User manual SUPERTOOTH ONE

[. . . ] This kit includes Text-To-Speech system. The voice announces instructions for the users in 6 different languages. It indicates the status of the Bluetooth device and it announces the name (or phone number if contact not loaded to kit) of the incoming caller!Don't forget: Drive safely and within the law. [. . . ] Connected to phone" will be announced. Accept connection request from the phone if a prompt is displayed. Important Note: Most phones automatically connect to the kit after pairing. With some phones you need to connect manually after pairing. Go back to Bluetooth > Paired devices > highlight ST ONE > press Options > then press Connect. When a call is received on your mobile phone, the name of the incoming caller will be announced on the kit. F. Automatic Transfer Not Supported By Phone If automatic transfer of phonebook failed, you can send or transfer the contacts to the SUPERTOOTH ONE by sending them via Bluetooth. IMPORTANT: This procedure will only work right after pairing or right after phonebook update (see Sections E and G respectively). There are two ways to proceed with the procedure depending on your phone model. Choose a contact or contacts you want to send to the kit. Note: Choose "Mark all" (if this option is available in your phone) to be able to send all contacts at one time. Fix the metal clip of SUPERTOOTH ONE on the sun visor. H. Installation Attach the magnetic back of SUPERTOOTH ONE to the fixed metal clip. The SUPERTOOTH ONE must be placed in such way that its microphone is directed to the mouth of the user. I. Basic Operations IMPORTANT: The kit needs to be `paired' to your Bluetooth mobile phone first, before you can use the following functions. See Pairing to your Bluetooth Mobile Phone in Section E. Make a Call (Normal Dial): Dial the number on your phone. During an ongoing call, the Bluetooth Indicator (3) will turn steady blue. Note: With some phones like Siemens S55 and Panasonic X70, audio is always on the phone during an outgoing call. You will need to press the MFB (1) for 1 second to transfer the audio to your kit. Answer a Call: When a call is received, the name or phone number of the incoming caller will be announced on the kit. During the ring tone, press MFB (1) for 1 second to answer the call and when call is answered, the Bluetooth Indicator (3) will turn steady blue. [. . . ] Volume Setting: Increase or decrease the volume by pressing the Volume Up (8) or Volume Down (7) button. Press repeatedly until desired level is reached. The Bluetooth Indicator (3) will turn violet as lowest and highest levels are reached. When maximum volume is reached, "Maximum Volume" will be announced on the kit. Audio Transfer (For Handsfree Profile Phones only): During an ongoing call, you can transfer the audio. [. . . ]