User manual SWEEX MO201 QUICK_START_GUIDE

[. . . ] Indicates the use of a PPP connection. English version Rear view of the modem Starting on the left, the following connections can be found at the rear of the modem: · ADSL port for connecting the ADSL line with telephone cable RJ11. · UTP Ethernet ports 1, 2, 3 and 4 for connecting computers with an Ethernet network cable RJ45. · Power port for connecting the power adaptor. Side view The Reset button is located on the side of the modem. Press and hold the button for 15 seconds. [. . . ] The correct settings for the Internet browser will be discussed below. Internet browser settings for Windows 98SE, 2000 and XP 1. In order to properly access the modem, the browser settings must be correct. This is easy to check by starting up Internet Explorer and selecting "Tools" (Tools) from the menu bar and then selecting the option "Internet Options" (Internet Options). In this window, go to "Connections" (Connections) and select "Never dial a connection" (Never dial a connection) or remove all connections listed in the field above. At the bottom, click "LAN Settings" (LAN Settings), remove all ticks and click "OK" (OK). Restart the computer. Modem access (Login) Open your web browser. In this example we use `Internet Explorer'. The standard modem IP address is: 192. 168. 201. 1. An IP address is a unique number required by each network device, including a computer or modem, in order to be active within that network. Without an IP address you are unable to make connections within a network. Type the modem IP address 192. 168. 201. 1 in the browser address bar. You can now access the modem. The modem login screen appears. Fill out the login name and the corresponding password. The standard login is "sweex" and the corresponding password is "mysweex". If this login screen fails to appear, recheck the settings of your Internet browser as described above. Also check the IP address of your computer. In this IP address, only the digits after the last dot may deviate from the IP address of the modem (e. g. : 192. 168. 201. xxx). Do this as follows: Win2000/WinXP: Click "Start" (Start) - "Run" (Run)- Type cmd- press ENTER- In the black window type ipconfig - press ENTER and your IP address is displayed. Win98/Me: Click "Start" (Start) ­ "Run" (Run) ­ Type winipcfg ­ press ENTER. In the window, select your network adaptor. (Usually NOT the ppp 12 English version adaptor) and your IP address is displayed. Once logged in, the main screen of the modem appears. This screen displays the current Internet connection and a variety of system information. Setting the Internet Provider (ISP) In order to facilitate the installation process, the Sweex ADSL 2/2+ Modem/Router Annex A disposes of a pre-programmed list of provider settings. To this end, go to the "Setup Wizard". [. . . ] The option "LAN" is displayed next to it. Select this option. 1 English version Changing the password (User Management) The standard login of the Sweex ADSL 2 can be changed as follows: in the main window select "Tools" and go to "User Management". Here, under "User name", you can choose a different login name and under "Password" the corresponding password. Repeat this password under "Confirmed Password". We do not grant support or warranties for any software and/or (rechargeable) batteries included. [. . . ]