User manual SWISHER PBA-6510

[. . . ] PBA-6510 Arctic Cat Models 250, 300, & 400 Models 02 and older 454 Models 98 & older 500 Models 02 & Older May fit additional models see Master List Front Partial Frame View Caution: Do not exceed 5 MPH with the blade or it's brackets installed Remove the mount plate(s) for trail riding where extra ground clearance is needed 1602 Corporate drive P. O. [. . . ] Please retain plate and hardware to be reinstalled if the plate is removed. . Arctic Cat 250 Assembly Instructions 1 Remove 4 foot peg bolts. (Retain for future use) 2 Install Right Hand Bracket with the mounting tab down and to the front. with new bolts spacing it out from the frame with two(2) washers (item 3) 3 Install Left Hand Bracket with new bolts and one washer (Item 3) to space it away from the frame. 4 Snug all hardware, then check for proper spacing of mounting tabs, (14 3/16 to 14 1/4 outside to outside) remove washers if necessary. 5 Tighten all hardware. 3 1 7 5 All other listed ATV's 1. [. . . ] See Figure 2 Tighten all hardware 2 6 4 Item # 1 2 3 4 5 6 7 Description Right Mount Plate Left Mount Plate Washer Flat Lock Washer Hair Pin #39 Clevis Pin Bolt M10-1. 25 X 30 Part # 10302TK 10300TK NB272 10146 NB127 10305 10304 [. . . ]