User manual SYLVANIA CT202SL8

[. . . ] READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. CLEANING - Unplug TV from the wall outlet before cleaning. [. . . ] Every time you start recording, an index is marked automatically. The index mark also works as the starting point of timer recording. The index mark will not be recorded if [PAUSE F] is used during recording. The time gap between making the index marks on the cassette tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording. In some cases, the index mark at the beginning of cassette tape cannot be detected. Example: You are watching program number 4 and want to fast forward to program number 7. This function describes how to record to this unit from the programs. One-touch timer recording (OTR) enables you to start recording for specified length simply by pressing [REC/OTR . Make sure the cassette tape has enough remaining tape for the recording. 4 Press [REC/OTR I] on the unit repeatedly until your Recording starts immediately when you press [REC/OTR I]. Time(s) Once Twice 3 times 17 times 18 times 3 Use [Cursor K / L] to until the number of programs If the recording is paused for more than 5 minutes, the unit will restart the recording to prevent cassette tape from damage. This unit cannot record the contents from the built-in DVD. You can only watch the same TV program that is being recorded. Even if you press [POWERy] during OTR, the unit continues y recording. You cannot start OTR with the remote control. In the SLP mode, maximum recording time, assuming the cassette tape starts at the beginning, is 8 hours using T-160 (or 6 hours using T-120). If the cassette tape runs out before the end time, the unit will switch to the stop mode immediately, eject the cassette tape and turn itself off. Forward to the beginning of desired program. 5 When the search is completed, the unit will start The numbers of index search can be set up to 20. This function is not available during recording. To cancel index search in progress, press [STOP/EJECT C A] on the unit or [STOP C] on the remote control. You can set 8 programs to record on specific days, daily or weekly within 1 year period. [. . . ] If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. Point the remote control towards it, push any button and listen. With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. [. . . ]