User manual SYLVANIA LC321SS9

[. . . ] The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the apparatus's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. , between antenna and CATV) or if you move the unit to a different area after the initial setup, or if you restore the DTV channel you deleted, you will need to perform auto channel scan. Make sure if the unit is connected to antenna or cables. PICTURE You can adjust the picture quality. (Refer to "Picture Adjustment" on page 22. ) SOUND You can adjust the sound quality. You can skip the undesired channels when selecting the channels using [CH K/L]. You can add the channels that were not scanned by the auto channel scan. You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen. You can select the sound input for the HDMI1 input jack if your unit is connected to an HDMI or DVI device. (Refer to "Energy Saving Mode" on page 32. ) LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. Use [Cursor K / L] to select "Autoscan", then press [ENTER]. Use [Cursor K / L] to select an appropriate option, then press [ENTER]. Back Air Cable Cable 1 hour When the scanning and memorizing are completed, the lowest memorized channel will be displayed. The channels selected here can be skipped when selecting the channels using [CH K / L ]. Those channels can still be selected with [the Number buttons]. After setting "Auto Channel Scan", using [CH K/L] on the remote control skips unavailable programs automatically. If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. â· Channel settings will be saved even if the power fails. â· Even if "Autoscan" is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [POWER]. [. . . ] If the infrared light appears through the camera, the remote control is working. Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the AC power cord. Should your unit become inoperative, do not try to correct the problem yourself. [. . . ]