User manual SYLVANIA LV448HG

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] " is displayed when the program guide is not provided. â· While the program guide is displayed, the closed caption function is interrupted. 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. Display a 16:9 picture at its original size. Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio. Display a 4:3 picture at its original size. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally to fill the screen. Display a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen. This crops out the top and bottom of the picture. Display the picture with its center at the original size and the edges stretched horizontally. Display a picture that is stretched out of proportion to fill the screen. â· Even if "Autoscan" is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [POWER]. Use [Cursor K / L] to select "Channel List", then press [ENTER]. The selected channel darkens in the channel list, and it skips when selecting the channels by using [CH K / L]. The registered channels will be gray in the channel list, and you can select those channels by using [CH K / L] again. â· When you skip a major channel, its minor channels are skipped as well. The manual register function lets you add the channels that were not scanned by the auto channel scan due to the reception condition at the initial setup. This function lets you check the digital signal strength of each channel. 4 Use [the Number buttons] or [CH K/L] to select the 4 Use [the Number buttons] to enter the number of the Channel you want to add, then press [ENTER]. If external input is used, it is not possible to register the channel and "Unavailable" will be displayed on the TV screen. â· By using [CH K/ L], you can select the memorized channels only. You can choose English, Spanish, or French as your on-screen language. [. . . ] If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. Point the remote control towards it, press any button and listen. With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control. Press any button on the remote control and look through the digital camera. [. . . ]