User manual SYMPHONIC CD1100

[. . . ] 4 I PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 I INITIAL SET UP FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 I SET UP FOR USE AGAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 I PLAYBACK FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1) Press the SEARCH MODE button so that the Time Search menu appears. 2) Enter your desired time to skip by pressing the PLAY or STOP button within 30 seconds. 3) Press the F. FWD or REW button to start time search. If you want to go in the forward direction, press the F. FWD button. If you want to go in the reverse direction, press the REW button. G After time search, the VCR will play the tape automatically. TIME SEARCH 2:50 3 G G G pressing the PLAY button. Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. To adjust the tracking manually, press the CHANNEL Up or Down button on the VCR. When a tape has reached the end, the VCR will rewind the tape to the beginning, eject the tape, and turn off the VCR automatically. S-VHS Quasi Playback (SQPB) This unit allows you to view a tape recorded in S-VHS format. (Noise lines may appear on the picture. ) To stop playback, press Begin playback by 4 the STOP button. STILL/SLOW 1) You can freeze the picture on TV screen by pressing the PAUSE/STILL button during playback. G The desired recording speed is selected in SP(standard play) or SLP(super long play) mode by pressing the TAPE SPEED button on the VCR. Tape Speed Recording/Playback Time Type of tape T60 T120 T160 SP mode 1 hour 2 hours 2-2/3 hours SLP mode 3 hours 6 hours 8 hours COPYING A VIDEO TAPE You can make copies of video tapes made by friends or relatives for your enjoyment. Warning:Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect the recording VCR(this unit), the playing VCR(another source) and your TV using the following diagram. [Recording VCR] (this unit) Audio/Video cables (not supplied) AUDIO OUT IN CH3 CH4 ANT IN [TV set] (Use for monitoring) OUT OUT OUT IN IN AUDIO VIDEO VIDEO ANT in [Playing VCR] (another source) Coaxial cable (supplied) VIEWING AND RECORDING THE SAME PROGRAM 1) Begin the recording by pressing the RECORD button. G To temporarily stop recording or resume it, press the PAUSE/STILL button. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head. 2) Stop the recording by pressing the STOP button when recording is completed. OTR(One Touch Recording) This function enables you to set the recording length simply by pressing the REC/OTR button on the VCR. 1) Begin OTR by pressing the REC/OTR button on the VCR repeatedly until the desired recording length appears. Press Display Recorded Length 1 press (normal recording) 2 presses 0:30 30 minutes 3 presses 1:00 60 minutes 17 presses 8:00 480 minutes 18 presses (normal recording) 1) Insert a pre-recorded tape into the playing VCR. 2) Insert a tape with its safety tab into the recording VCR. 3) Press the TAPE SPEED button on the recording VCR to select the desired recording speed (SP/SLP). [. . . ] (Sólo en el mando a distancia) 20. Botón del modo de búsqueda (SEARCH MODE) - Púlselo para realizar una búsqueda con tiempo o una búsqueda con índice. (Sólo en el mando a distancia) 21. Cable de alimentación - Conéctelo a una toma de CA estándar (120 V/60 Hz). [. . . ]