User manual TANDBERG DLT-V4

[. . . ] PRODUCT MANUAL TAPE DRIVE DLT-V4 DLT-V4 Product Manual, 81-81523-01 A01, November 2005, Made in USA. Tandberg Data provides this publication "as is" without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Tandberg Data may revise this publication from time to time without notice. COPYRIGHT STATEMENT Copyright 2005 by Tandberg Data. [. . . ] start. 4 Power on the server or workstation and allow its operating system to 5 Check the tape drive to make sure it is working properly. See Power- On Self-Test (POST) Indicator Activity on page 47 to learn about the tape drive's self-test and initialization features. DLT-V4 Product Manual 31 Chapter 2 Installing the Tape Drive Installing the Device Drivers Installing the Device Drivers This section describes how to install device drivers for Microsoft Microsoft Windows 2000, Windows XP, and Windows 2003 Server. Note: 2 If you intend to use native operating system backup applications, you can find the required device drivers at www. tandberg. com. Commercial backup applications generally provide all necessary device driver support. Microsoft Windows XP and Windows Server 2003 2 1 Make sure that you are logged on to the server or workstation with Administrator privileges. 2 Download and extract the required driver files from www. tandberg. com. The system may automatically detect the DLT-V4 tape drive and display the "Found New Hardware Wizard". If the Wizard appears, proceed directly to step 3, otherwise start the Wizard manually as follows: a b c Right-click My Computer, and select Manage from the drop-down menu. This will start the Computer Management applet. In the left window under System Tools, double-click Device Manager. In Device Manager, the DLT-V4 tape drive will be listed under either "Tape drives" or "Other devices". Locate the entry for the DLT-V4 tape drive. Then double-click that entry to display the Drive Properties. The "Hardware Update Wizard" will start. Proceed with step 3. d e 3 Select "Install from a list or specific location (Advanced)". 4 In the next view, ensure that the option "Search for the best driver in these locations" is selected. Then clear the "Search removable media" box and instead select "Include this location in the search". 5 Click Browse . . . , and select the folder where you saved the driver files. Then click OK. DLT-V4 Product Manual 32 Chapter 2 Installing the Tape Drive Installing the Device Drivers 6 Click Next to install the driver. You may be prompted to reboot your system. The DLT-V4 device driver is installed. Microsoft Windows 2000 2 1 Make sure that you are logged on to the server or workstation with Administrator privileges. 2 Download and extract the required driver files from www. tandberg. com. 3 The system may automatically detect the DLT-V4 tape drive and display the "Found New Hardware Wizard". If the Wizard appears, proceed directly to step 4, otherwise start the Wizard manually as follows: a b c Right-click My Computer, and select Manage from the drop-down menu. This will start the Computer Management applet. In the left window under System Tools, double-click Device Manager. In Device Manager, the DLT-V4 tape drive will be listed under either "Tape drives" or "Other devices". Locate the entry for the DLT-V4 tape drive. Then double-click that entry to display the Drive Properties. The "Upgrade Device Driver Wizard" will start. [. . . ] RoHS mandates that new electrical and electronic equipment put on the market does not contain lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls (PBB), or poly-brominated diphenyl ethers (PBDE). S SAN Storage Area Network. SATA Serial Advanced Technology Attachment. A Serial ATA International Organization (SATA-IO) standard for the interface between a computer and peripheral controllers. An American National Standards Institute (ANSI) standard for the interface between a computer and peripheral controllers. [. . . ]