User manual TANITA BREATH ALERT

[. . . ] · If you're unable to brush your teeth, use a mouth spray or chew gum. · Drink plenty of water. Getting Started How to Measure Breath Odor Before use The batteries are already installed. To activate the unit, simply remove the strip on the positive polarity. [. . . ] · Clean occasionally by wiping with a soft cloth; don't use water, soap, paint thinner, etc. · Don't apply pressure or subject the unit to vibration. · Store in a place free from scents or odors. If you carry the product in a cosmetic bag, for example, perfume or cosmetic scents may adhere to the product. · Store in a place free from humidity, direct sunlight, and dust. · Don't store near a heating system. Troubleshooting If nothing appears on the LCD display after pushing the power button . · Check to see that the batteries are correctly installed and no dust has accumulated on them. Reposition clean batteries as necessary. If the readings are different each time . · Move away from wind or strong environmental odors or scents. If the head icon appears, but the breath odor level does not appear on the LCD display . · Reset the unit by gently waving it 4­5 times. Move away from wind or strong environmental odors or scents. If your breath odor level is higher than expected . · Reset the unit by gently waving it 4­5 times. Make sure you wait 10 minutes after brushing your teeth before taking a reading. If your breath odor level is lower than expected . · Move away from wind or strong environmental odors or scents. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]