User manual TASCAM CD-D17HD

[. . . ] Tower CD Duplicator User's Manual CD-D13 CD-D17HD Safety Precautions TASCAM CD Duplicator systems are high-precision electronic devices. Do not use them in any manner other than as specified in this manual. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] If the simulation fails, the copy process is cancelled. 4 Verify The Verify function verifies that the target disc was written completely and with no errors. 5 Compare The Compare function compares data on the source and target discs after the copy process is complete. Note: This function works only with data discs. 6 Prescan The Prescan function is performed on the source drive. This function scans the disc to determine the maximum data/audio extraction speed. 7 Disc Info The Disc Info function displays detailed information about the source disc, including sessions, tracks, capacity, etc. 8 Select Source The Select Source function enables you to select a drive (CD-ROM drive, CD Writer drive, or hard disk drive) as the source from which to copy. You can select a hard disk drive only on those Tower CD Duplicator systems that feature a factory-installed hard disk drive. 14 TASCAM Tower CD Duplicator User's Manual 9 Image 9 Image The Image menu, which consists of six functions (9. 1 through 9. 6), is valid only on the CD-D17HD Tower CD Duplicator system, which features a factoryinstalled hard disk drive. The Image menu includes Load, Delete Image, Image Info, Compare Image, Select Partition and Select Src Drive functions. The data loaded onto the hard disk drive is called an "image file. " 9. 1 Load The factory-installed hard disk drive was partitioned and formatted at the factory. An alphabetical letter identifies each partition. Each partition is approximately 1GB in capacity. The number of partitions depends on the capacity of the hard disk drive. The Load function enables you to transfer data from the CD-ROM drive or any CD Writer drive to the current partition of the hard disk drive. (Note: P:A stands for partition A. ) You can load as many disc images as the number of partitions available on the hard disk drive. 9. 2 Delete Image Use the Delete Image function to delete an image stored in a particular partition. 9. 3 Image Info Use the Image Info function to display basic information for an image file stored in a particular partition. 9. 4 Compare Image Use the Compare Image function to compare the contents of a source CD-ROM disc with the image file in the partition. 9. 5 Select Image The internal hard disk drive was partitioned and formatted at the factory. An alphabetical letter identifies each partition. Each partition is approximately 1GB in capacity. The number of partitions depends on the capacity of the hard disk drive. Use the Select Image function to select an image file that is stored in a specific partition on the hard disk drive. 9. 6 Select Src Drive Use the Select Src Drive function to select the CD-ROM drive or a CD Writer drive as the source from which you can load data into a particular partition as an image file. TASCAM Tower CD Duplicator User's Manual 15 10. Edit Track (for CD only) The Edit Track functions enable you to create and copy a collection of songs from different audio discs. Note: The CD+G value must be set to OFF before you can use the Track Extraction feature. [. . . ] Damage resulting from repair or attempted repair by anyone other than TEAC Service Department. Damage resulting from modification or attempted modification of product not authorized by TEAC. Damage resulting from causes other than product defects, including lack of technical skill, competence, or experience of the user. Damage to any unit that has been altered or on which the serial number has been defaced, modified or removed. [. . . ]