User manual TASCAM CD-RW402 annexe 1

[. . . ] · If anything appears to be wrong with the CD-RW402: · If an error message appears, make a note of it, as well as what you were doing immediately prior to the problem occurring. It may well contain something which is relevant to the problem you have encountered. · If you have Internet access, visit your local TASCAM Web site for the latest product news, etc. [. . . ] 2 Adjust the level of analog signals (and their balance) using the INPUT and BALANCE controls. 3 Use the REC MENU 1 menu to select the digital volume to set the level of all signals (analog post-step 2, and digital). Adjust the level between -60 and +18 dB (there is also an "off" setting, shown by ---). REC MENU 1 DIG VOLUME TASCAM CD-RW402 Quick Start guide How do I. . . ? restart playback from the point where I last started?On drive 1 and drive 2, you press the CALL key. This will locate the playback position from which playback last started, and enter ready mode. On either drive, with the drive in play or play ready mode, press the appropriate JOG key. While monitoring, use the MULTI DIAL to jog a loop backwards and forwards to frame accuracy. The end of the loop marks the point which will be set. Press READY to locate playback at the end of the loop. The length of the loop is set using the menu system. cue up the playback position to the first sound in a track?You can set the playback position to the first sound in a track (as opposed to the track division) using the Auto Cue and Auto Ready functions (menu items). The playback position can then automatically be cued up to the point at which the sound level crosses the set threshold level when a track is selected for playback. play back a whole disc with only part of a certain track?TOC editing allows you to redefine the disc in drive 1. [. . . ] reuse a disc which I finalized by accident?It may happen that you have recorded a disc, finalized it, and now want to add another track or two. With the CD-RW402 this is not a problem. [. . . ]