User manual TEAC AD-500

[. . . ] Read this manual carefully to get the best performance from this unit. This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] The first programmed track number will light and "P-01" will blink in the display. Each time the CHECK button is pressed, the next programmed track number will light. "P-XX (Program number)" will blink in the display. O When the last programmed track number is displayed, pressing the CHECK button will return the CD player to the Program mode, allowing you to add tracks to the program. O The track numbers stored in the program memory will be displayed on the Music Calendar. However, please note that the Calendar can handle only up to track 20. If higher track numbers are entered in the Program memory, the OVER indicator will light. Programmed playback starts from the first programmed tune. O Programming tunes is possible only when the player is in the Stop mode. O The programmed contents will be held in memory even after programmed playback has been completed or when programmed playback is stopped by pressing the STOP button. O During program playback, the TOTAL REMAIN time display shows the total remaining time of the programmed tunes, from the current position. O If tunes with numbers higher than 32 are programmed, TOTAL time may not appear in the display. The repeat function allows repeat playback of any single tune, the entire disc, or any desired portion on the disc designated by two (start and end) points. O The repeat functions can be released by pressing the repeat button again. Start playback from any point before the section to be designated. Designate the point at which repeat playback should start (point A) by pressing the A-B button. O Press the Æ button with the random play function engaged to select a tune at random. Press the Ú button to replay the currently played tune from its beginning. O A tune cannot be replayed after it has been played in this mode. O To release the random play function while it is engaged, press the SHUFFLE button again. Tunes will play back in their normal designated order, starting from the currently played tune. The selected tune is played, then when the end of the tune is reached, the player will return to the beginning of the tune and playback starts again. [. . . ] To give you a few ideas of what to look for, check the following: Problem General No power when POWER is pressed. Keep a reasonable distance between them or switch off the power of this unit. CD player No playback when disc is loaded. No CD output A single tune can only be played. [. . . ]