User manual TEAC CD-P1260

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 5) Do not use this apparatus near water. 7) Do not block any ventilation openings. install in accordance with the manufacturer's instructions. [. . . ] Note: To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. Hold down these buttons to search for a part of a track. During playback of a MP3 disc, use these buttons to select a folder in the disc. When operating the remote control unit, point it towards here. Be sure to remove the power cord from the AC outlet before repositioning the voltage converter switch. Using a flat-bladed screwdriver, set to the appropriate 230V or 120V position according to your area. For private listening, insert the headphones plug into this jack, and adjust the volume by turning the LEVEL knob. CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord. The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. < Even if the remote control unit is operated within the effective range (5m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. < If the remote control unit is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly. Insert two "AA" (R6 or SUM-3) dry batteries. Make sure that the batteries are inserted with their positive "+ " and negative "_" poles positioned correctly. Connect this jack to the CD input jack of the amplifier with an RCA cable. Make sure to connect : white plug q white jack (L: left channel) red plug q red jack (R: right channel) Battery Replacement If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones. Precautions concerning batteries < Be sure to insert the batteries with correct positive "+" and negative "_" polarities. [. . . ] It may not be possible to play back CD-R/RW discs. E You cannot play back unfinalized CD-R/RW discs. E If the disc is dirty, clean the surface of the disc. When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation erratic or impossible. [. . . ]