User manual TEAC CD-W28PU

[. . . ] ® Portable USB CD-RW Drive CD-W28PU User's manual To ensure the smooth handling of your warranty please write the serial number of your drive into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. · Changes in specifications and features may be made without notice or obligation. · · · · Copyright © 2001, TEAC Corporation Ltd. First edition: October 2001 Company and product names provided herein are trademarks of their respective companies. Windows 98 Second Edition, Windows Me, and Windows 2000 are registered trademarks of Microsoft Corporation in the U. S. [. . . ] If you use any USB 2. 0 host adapter with your system, it is required to install the USB 2. 0 host adapter and the driver for it before connecting this drive C a u tio n "TEAC CD-W28E" at "CD-ROM" "USB Mass-Storage Device" at "Universal Serial Bus Controller" "USB CD-ROM" at "Storage Device" 5. Setting up the CD-W28PU 75 5. 5 Driver installation Windows 2000 ENGLISH The USB device drive is included in Windows 2000. When this drive is connected, Windows 2000 will automatically install the appropriate driver and the drive will be ready to be used. You do not have to perform any special installation or uninstallation. You can confirm that the drive has been recognized after connection by using Device Manager. If you use any USB 2. 0 host adapter with your system, it is required to install the USB 2. 0 host adapter and the driver for it before connecting this drive C a u tio n "TEAC CD-W28E USB Device" at "DVD/CD-ROM Drive" "USB Mass-Storage Device" at "USB (Universal Serial Bus) Controller" 76 5. SYSTEM RECOVERY PROCEDURE When an abnormality occurs in the computer and reinstallation of the OS is required, the system can be recovered (reinstallation of OS) by using the drive and the provided recovery driver disc. It is highly recommended to make Start Up Disk right now before you have any problem with your computer. 6. 1 System recovery of Windows 98SE 1. Open Add/Remove Programs Properties, choose Startup Disk, then click Create Disk. . . 3. Insert the Windows Disc into a CD-ROM drive or the CD-W28PU of your computer. Insert a blank floppy disk into FDD of your computer 5. Find out "Config. sys" file in the Startup Disk by using My Computer. 6. System Recovery Procedure 77 ENGLISH 7. Open the Config. sys file by using any editing tool like Note Pad of Windows Accessory. ENGLISH 8. Delete all parameters(lines) in [CD] section except the following two parameters. himem. sys /testmem:off oakcdrom. sys /D:mscd001 9. Change the parameter of "oakcdrom. sys / D:mscd001" to "tusb_cd. sys / D:MSCD001" , then save the file. 10. Eject the Startup Disk from the FDD of your computer. 11. Insert the dedicated driver disk into the FDD of your computer. 12. Pick out the "tusb_cd. sys" file from the Recovery folder of the dedicated driver disk, then copy it into your computer(e. g. 13. Eject the dedicated driver disk from the FDD, then insert the Startup Disk into it again. 14. Copy the "tusb_cd. sys" file from your computer to the Startup Disk. [. . . ] Folgendes ist aus dem Gewährleistungsumfang ausdrücklich ausgeschlossen: 1. Geräte, die verändert wurden oder deren Seriennummern verfälscht, verändert oder entfernt wurden. Schäden oder Fehlfunktionen, die auf folgendes zurückzuführen sind: (a) Höhere Gewalt, fehlerhafter und/oder nicht bestimmungsgemäßer Gebrauch, (b) Gebrauch, der nicht den im Handbuch angegebenen Verfahrensweisen entspricht, (c) Transportschäden jedweder Art. Für Transportschäden haftet das Frachtunternehmen. [. . . ]