User manual TEAC GF-450K7

[. . . ] CEC6P10501630 Z CD recorder with turntable/cassette player OWNER'S MANUAL GF-450K7 IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [. . . ] Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator 2 Press the OPEN/CLOSE button (L). total number of the tracks 3 Place a disc on the tray with the printed label face up. total play time of the disc < The disc type indicator shows the type of disc currently loaded. CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW NO TOC CD-R: A CD-R which has yet to be finalized NO TOC CD-RW: A CD-RW which has yet to be finalized blank: Unreadable disc < When a non-music CD is inserted, its contents may be detected and playback may start. However, no sound is generated. 5 Press the PLAY button (y) to start playback. < Never place more than one disc on the tray. < The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. Disc playback starts from the first track, and the PLAY indicator (y) lights on the display. < If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts. 17 Listening to a CD 2 AB Time Display CD A To suspend playback temporarily (pause mode) Each time the DISPLAY button is pressed, the display changes as follows: CD/CD-R/CD-RW playback Press the PAUSE button (J) during playback. To resume playback, press the PLAY button (y) or the PAUSE button (J). elapsed time of current track B To stop playback time remaining for current track Press the STOP button (H) to stop playback. total elapsed time of the disc C To skip to the next or a previous track time remaining for the disc During recording During playback, repeatedly press the SKIP button (. or/) until the desired track is found. The selected track will be played from the beginning. In the stop mode, press the SKIP button (. or/ ) repeatedly until the track you want to listen to is found, and press the PLAY button (y) to start playback from the selected track. button is pressed during playback, the track being played will be played from the beginning. To return to the beginning of the previous track, press the . button twice. elapsed recording time of the track remaining recording time of the disc In record pause mode D Search for a part of a track total number of the tracks total play time of the disc During playback, hold down the SKIP button (. or/) and release it when the part you want to listen to is found. remaining recording time of the disc 18 Repeat Playback Shuffle Playback Each time the REPEAT button is pressed, the repeat mode is changed as follows: REPEAT ALL (off ) REPEAT 1 The tracks can be played randomly. Press the SHUFFLE button during playback. (In the stop mode, press the SHUFFLE button and the PLAY button. ) When the shuffle playback of all the tracks has been finished, the unit stops and the shuffle playback mode is cancelled. < If you press the / button during shuffle playback, next track will be randomly selected and played. button, the currently played track will be played from the beginning. A track cannot be replayed during shuffle playback. < Shuffle playback doesn't work during programmed playback. REPEAT ALL (Repeat All the Tracks) Press the REPEAT button once during playback. All the tracks of the disc will be played repeatedly. REPEAT 1 (Repeat one track) Press the REPEAT button twice during playback. [. . . ] 60 Hz to 20 kHz Audio input sensitivity/Impedance . AUX: -6dBV(0. 5V)/20k Maximum iutput level . . AUX:+6dBV(2. 0V) CD Recorder Section Media type . CD-RW and CD-R for Digital audio (record and playback), CD (playback only) Recording sampling frequency . [. . . ]