User manual TEAC MP-330E0A

[. . . ] Insert 2 AA-size alkaline batteries according to the drawing. Please make sure that the batteries are properly inserted, with + and - side according to the the markings on figure 1. EN figure 1 Note: Batteries contain chemical substances, when empty, they should be properly disposed of. 3 Front Panel EN 1 5 6 2 3 7 8 4 1 2 3 4 Stop/Off ( ) Previous ( ) Play/On/Pause ( Next ( ) ) 5 6 7 8 Equalizer Repeat Intro Program figure 2 4 Side Panel EN 9 10 11 9 Power supply in 10 Headphone in + Line out figure 3 11 Open player cover 14 Volume control 14 12 13 12 Hold 13 Bass boost figure 4 5 Connecting the AC adapter Insert the 120VAC AC adapter into the appropriate socket (9 figure 3). EN Insert the power plug into the main outlet. Getting Started Open the cover by sliding the "Open" switch (11 figure 3). Insert a MiniCD into the player, with the disc label facing up. [. . . ] To stop the intro function, press the Intro button (7 figure 2) once again or press the Play button (3 figure 2). Repeat (6) The repeat function has 5 modes: Off/Repeat song/repeat title/repeat all/random play. Press Repeat button (6 figure 2) to change the repeat mode; the default setting is "repeat off". Repeat Off is not displayed on the LCD-display. If the player is in Program mode, the Repeat function will only repeat the memorized songs. Equalizer (5) The TEAC MP3 Player has 4 equalizer modes: Normal/Jazz/Rock/Classic. Press the EQ button (5 figure 2) to change the EQ mode; default setting by power on is "normal". Normal mode is not displayed on the LCD-display. Please note that the EQ function only works when playing MP3 CD's. Bass Boost (13) Turn on the switch to enable the Bass Boost function. Refer to figure 4. EN 9 Hold (12) Turn on the switch to hold (disable) all panel buttons. Refer to figure 4. EN Open (11) Slide the switch to open the player cover. Opening the cover will stop any action, but the power will remain on. Volume (14) The TEAC MP3 Player has a rotary volume controller; turning the volume-wheel clockwise will increase the volume; turning the wheel anti-clockwise will decrease the volume. Earphone and AC adapter connections DC jack (9 figure 3) is used for connecting the AC adapter. Stereo earphone jack (10) figure 3 is used for connecting the headphone or the optional cable to connect the player to your HiFi-system. ESP and mechanical anti-shock The TEAC MP3 Player is equipped with a Electronic Shock Protection feature for MP3 CD, and with a mechanical anti shock feature, which ensures continuous play while playing AudioCD's. Both ESP and Anti-Shock features are always enabled. 10 WARNING! [. . . ] 8cm CD-media can not be used in a "slot-in" drive and in a car-hifi set, unless a CD-adapter is used. Supported CD format: CD-DA and MP3 (MPEG-1 Audio ISO/IEC 11172-3) including . MP3 or . MPx Supported CD media: CD-ROM, CD-R, CD-RW Supported CD mode: CD Digital Audio, CD ROM mode 1 or mode 2, CD EXTRA (multi session) EN Disc: 14 Power supply: 1. 5V AA alkaline battery x 2 TEAC recommends Duracell UltraM3 AA alkaline batteries for optimal performance. 4. 5V/1A Linear Power Adapter Operation Time: Anti-shock: up to 7 hours on 2 AA-size alkaline batteries 40 secs mechanical anti-shock for CD-DA 8secs ESP for MP3 32Kbps ~ 320Kbps (MPEG-1 layer 3) max. 44. 1KHz EN Supported bitrate: Supported sampling rate: Temperature and humidity Storage: temp. [. . . ]