User manual TEAC SR-LX5I

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] This antenna may need to be repositioned if you move your unit to a new location. You can enjoy videos or slideshow reproduced by your iPod through your TV screen. Connect this jack to S-VIDEO IN/VIDEO IN of your TV set using a commercially available S-Video or composite video cable. For private listening, insert the headphones plug into this jack, and adjust the volume using the VOLUME button. You can connect a portable audio player to this jack. The SR-LX5i comes mounted with an adapter "60GB (color) + Photo 40/60GB". To play your iPod through the SR-LX5i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below. Hold the left and right sides of the adapter and gently pull it up. Choose the Dock adapter that fits your iPod mobile digital device. < Use a commercially available adapter to play iPod with dock connector. Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight "click" is heard indicating the adapter is inserted correctly. IPod video output Make the following settings on your iPod's menu to output video to a TV via this system's dock. If you have set [TV OUT] to [Ask], your iPod prompts you each time you play a video to specify whether to output it to a TV. Note: If you output video to a TV from your iPod, the video is not displayed on the iPod's screen. You will have to specify whether to a output video to a TV each time you play it. Using the alarm on your iPod touch If you specify [Slide to power off] on your iPod touch, you cannot use the alarm even if the iPod touch is docked to this system. To use the alarm on your iPod touch, do not select [Slide to power off]. (The screen can be turned off without any problem. ) If Video is displayed on your iPod touch's screen, you cannot use the alarm even if the iPod touch is docked to this system. To use the alarm on your iPod touch, select any item other than Video. < When you need to remove the adapter, hold the left and right sides of the adapter and gently pull it up. [. . . ] E Press the STANDBY/ON switch to turn the unit on. E If the battery is exhausted, replace it with a new one. E Use remote control unit within the range (5 m) and point at the remote sensor on the front panel. E Clear obstacles between the remote control unit and the main unit. [. . . ]