User manual TECHNOMARINE CRUISE CHRONO MAGNUM

[. . . ] 3-4 Using the Screen Adjustment Menu (OSD: On Screen Display) . 3-5 INSTALLING THE SOFTWARE Natural Color . 4-4 TROUBLESHOOTING Monitor Self-Diagnosis . 5-3 MORE INFORMATION Specifications . [. . . ] If you press the [ DESCRIPTION ] button when there is no OSD, the input signal (Analog/Digital) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. This function is not available for products with an Analog interface only. AUTO Press [AUTO] button to adjust the screen settings automatically This function is only available in Analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off Power LED This LED is turned on when the product works normally. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption. 3-4 Using the product 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure Top Menus PICTURE Brightness Coarse COLOR Color Gamma SIZE & POSITION H-Position V-Position Image Size Menu H-Position Menu V-Position Contrast Fine Red Green Blue Color Tone Sub Menus Sharpness Bright Angle Reset SETUP&RESET PC/AV Mode Menu Transparency INFORMATION Language Key Repeat Time Eco Saving Customized Key Off Timer On/Off Auto Source Off Timer Setting Display Time Monitor functions may vary according to models. Please refer to actual product. PICTURE Menu Controls the screen brightness. Brightness · · This menu is unavailable when < Description Bright> is set to <Dynamic Contrast> mode. This menu is unavailable when <Eco Saving> is set. Controls the contrast of the pictures displayed on the screen Contrast · · This menu is unavailable when < mode. This menu is unavailable when < Bright> is set to <Dynamic Contrast> or <Cinema> Color> is set to <Full> mode or <Intelligent> mode. Using the product 3-5 Menu Description Controls the clarity of details of pictures displayed on the screen Sharpness · · This menu is unavailable when < mode. · <Off> - Turns the < Color> function off. Color> with the original pictures. Color · · · <Demo> - You can compare the pictures processed by < <Full> - Provides a clearer picture including areas corresponding to skin color. <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color. This menu is unavailable when < Angle> is set. You can adjust the red color value of pictures according to your preference. Red This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the green color value of pictures according to your preference. Green This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can adjust the blue color value of pictures according to your preference. Blue This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode. You can set the color temperature according to your preference. · · · · Color Tone · <Cool 2> - Sets the color temperature of the screen to very cool. <Cool 1>- Sets the color temperature of the screen to cool. <Normal> - Sets the color temperature of the screen to the standard color temperature. <Warm 1> - Sets the color temperature of the screen to warm. [. . . ] Windows 7 : Change the frequency by selecting Control Panel Appearance and Personalization Display Adjust resolution Advanced settings Monitor, and then change the refresh rate under Monitor Settings. (For more information, refer to the User Manual of the computer or the graphics card. ) Windows XP : Change the resolution by selecting Control Panel Appearance and Themes Display Settings. Windows ME/2000 : Change the resolution by selecting Control Panel Display Settings. Windows Vista : Change the resolution by selecting Control Panel Appearance and Personalization Personalization Display settings. [. . . ]