User manual TECHWOOD PSW112

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. [. . . ] ­ To confirm the audio format of the current DVD selection display, press AUDIO. ­ Repeated pressing of the AUDIO button may allow you to select between various audio formats available on the disc. 11 PREPARATION Before Operation General Explanation This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. Repeat mode Icons TITLE Repeat Title Repeat Chapter Repeat Track (Audio CD only) Repeat All Tracks (Audio CD only) Repeat A-B Repeat Off Resume play from this point Action prohibited or not available CHAPT TRACK ALL A B On-Screen Display General playback status can be displayed on the TV screen. Some items can be changed on the menu. OFF On-screen display operation 1 to 2 Press 3 or 4itemselect an item. 3 Press 1 or 2buttonsnumber). also someoffunctions, The number can be be used for setting numbers (e. g. , title For press SELECT/ENTER to execute the setting. DVD Press GUI DISPLAY during playback. Notes Some discs may not provide all of the features included on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. Items Title Number 1/3 4 Function (Press 3/4 to select desired item) Displays the current title number and total number of available titles, and skips to a desired title number. Displays the current chapter number and total number of available chapters, and skips to a desired chapter number. Displays the elapsed playing time, and searches a point identified by its elapsed time. Displays the current audio soundtrack language, encoding method and channel number, and any changes you make to the setting. Displays the current subtitles language, and any changes you make to the setting. Both side of the original picture may be cut off. 16:9 Wide: Select when a 16:9 wide TV is connected. Before Operation (Continued) Sound Digital Audio Output Each DVD disc may have a variety of audio output options. Set the player's Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connect the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder. PCM: Select when connected to a 2 channel digital stereo amplifier. The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others Sample Freq. 48 KHz 96KHz DOLBY DIGITAL Others The DRC and Vocal settings can be changed. 4 Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item alternates between On and Off. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others DRC Off Vocal On Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). [. . . ] The Digital Audio Output is set to the wrong position. The playback picture is poor. The DVD player does not start playback. The disc is dirty. No disc is inserted. An unplayable disc is inserted. The disc is not placed within the guide. [. . . ]