User manual TEFAL ASTUCIO

[. . . ] If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. BEFORE FIRST USE 1. Remove all packing materials from the outside and inside of the barbecue. Clean the cooking dish, the drip tray and the grill plate (depending on model) with hot water and wipe it with care. [. . . ] · Use only one appliance per plug and always use an earthed extension cable, with cross section of at least 1 mm2. · Never place aluminium foil or any other object between the cooking dish or the grill plate (depending on model) and the heating element. · Place the appliance on a firm table : avoid using it on a soft base. · Do not use any other cooking dish than the one supplied with the appliance. · Never touch the metallic parts (body or grill plate) while the appliance is in use as they can become very hot. · We recommend you always using gloves when handling the cooking dish, the lid and the grill plate (depending on model) : steam emission can come out when opening de lid. · Do not move your appliance when cooking in order to prevent any risk of burning. · Never place your appliance on a fragile surface (glass table, piece of furniture. . . ). · Do not place anything between the grill plate (depending on model) and the food (e. g. · To keep the benefits of the nonstick coating inside the cooking dish : - never heat for more than a few minutes when empty (respect the time of preheating if this one is necessary) ; - use wooden utensils to stir food ; - do not cut directly in the ENG cooking dish. · Before switching off at the mains, turn the thermostat to the stop position (0). USE OF ADJUSTABLE THERMOSTAT 0 1 2 3 4 stop keep warm / re-heat simmer fry seal Note : You can adjust the thermostat depending on the dishes to be cooked. With smaller quantities of food, it may be necessary to reduce the thermostat to a lower number. CLEANING · Unplug and leave the appliance to cool. · The body of the appliance and the fixed reflector can be cleaned with a sponge and washing-up liquid. : to easily clean the fixed reflector, raise the liftable heating element. [. . . ] The flexible cord insulation should be stripped back as appropriate and a suitable alternative plug fitted. The replacement plug must be equipped with an appropriate fuse. If the plug has external access to the fuse (non-rewirable type plug) please note that the fuse cover is an important part of the plug. [. . . ]