User manual TEFAL BL305801

[. . . ] € Do not operate the blender if the lid is not in place. USING YOUR APPLIANCE • Moisten the gasket (c2) and position it correctly on the blade unit (c1): the 3 folds of the gasket must be visible once it is in place. If it is positioned in the other direction, you will not be able to lock the blade unit on the jug. € Place the assembly (c1+c2) on the 29 base of the jug (c3). [. . . ] 2- Position the gasket (d1) or (e1) in its recess on the blade unit (d2 or e2). Position the blade unit on the bowl aligning both the marks on the bowl and the blade unit. Lock the accessory by rotating the blade unit through a quarter turn in the anticlockwise direction. Caution: leaks can occur if the accessory is not locked correctly. 3- Rotate the assembled assembly (D or E) and position it on the motor unit. The red lock (open) is aligned in the slot on the motor unit. (Fig 6 - position 1) 4- Then rotate the assembled accessory (D or E) through a quarter turn clockwise until the green lock (closed) appears. 5- Plug in the appliance and turn the speed selector (B) to the desired position or apply a few pulses. Hold the bowl (F) when the appliance is running. To stop the appliance, turn the speed selector (B) back to position “0”. 6- Unlock the accessory by rotating it through a quarter turn in the anticlockwise direction, until the appears. Red lock (open) Remove the assembled accessory (D, E) from the motor unit. Turn it over on the worktop before unlocking the blade unit (d2, e2) from the bowl (F) in the reverse order of the assembly. The blades are very sharp: handle them with caution to avoid injury. You can then collect the preparation in the bowl. * The colour of the bowl may change after blending certain very hard ingredients: (cloves, cinnamon, etc. ) 40 g 1 rusk 60 g 60 g 10 g 40 g Operating time 3 s / speed 2 10 seconds per pulse 6 sec / speed 1 30 seconds per pulse In pulses 30 sec / speed 2 Accessory D D D D D E CLEANING YOUR APPLIANCE • Unplug the appliance and remove the accessories • Handle them with caution: the blades on the blender jug and accessories are sharp. € Remove the jug and rinse it and its lid under running water. € To clean the motor unit (A), use a moist cloth. € Never immerse the motor unit (A) in running water. € For easy cleaning, be sure to wash the removable parts in water and a little washing-up liquid immediately after use. € To clean the blender jug (C) easily, unlock the blade unit (c1) by rotating it through a quarter turn in the anticlockwise direction. [. . . ] Reposition the gasket on the blade unit (d2) or (e2) and lock it correctly onto the bowl (F). reduce the size or quantity of ingredients processed. Add liquid Reposition the gasket, the 3 folds should be visible as shown in Fig. Impossible to lock the blade unit with the gasket (c1+c2) on the jug (c3). [. . . ]