User manual TEKTRONIX WVR8200 ANNEXE 795 DATASHEET

[. . . ] Advanced 3G/HD/SD-SDI Waveform Rasterizer WVR8300 · WVR8200 Data Sheet New Tektronix-patented Spearhead Display and Luma Qualified Vector (LQVTM) Display Facilitate Precise Color Adjustment for Post Production Applications (Opt. PROD) Tektronix-patented Diamond and Arrowhead Displays for Gamut Monitoring Most Comprehensive Audio Monitoring (Opt. DPE) Multichannel Surround Sound*1 display and flexible Lissajous display Audio Loudness monitoring to ITU-R BS. AD or DPE) Comprehensive Dolby metadata decode and display (Opt. [. . . ] Red/Cyan Anaglyph Display ­ The left image is shown in red and the right image is shown in cyan, with identical left and right objects shown in monochrome. This allows the user to isolate differences between objects and gauge the depth of the object within the image. Green/Magenta Anaglyph Display ­ The left image is shown in green and the right image is shown in magenta, with identical left and right objects shown in monochrome. If an object appears in magenta and then green this indicates that the object is coming out from the screen plane. Similarly if the object appears in green and then magenta the object is behind the screen plane. Checkerboard Display ­ This picture display shows a block of the image from the left eye and then the next block shows the image from the right eye in a 16×9 checkerboard pattern. This helps the user compare the levels and color of the signal between the left and right images. These modes help the user compare the disparity between the left and right images and can assist in interpreting the depth of the objects within the image. 3D Left and Right Eye images showing Disparity Grid and Disparity Cursor measurement using SIM mode. For measurement of the depth of an object within the image a Disparity Grid can be overlaid over the picture with a horizontal disparity between 1 to 15% of screen width and a vertical disparity of 50%, 25%, or 10% that can be selected by the user. The horizontal and vertical position controls allow the Disparity Grid to be moved around within the picture display to gauge the depth of objects within the image. A set of Disparity Cursors are also available for precise measurement of horizontal disparity of an object between the Left and Right Eye images. Readout is given of the pixel difference between the cursors and the percentage of disparity of an object. www. tektronix. com 7 Data Sheet See and SolveTM displays detect and address problems quickly and efficiently. FlexVu ­ The display that adapts to your work practices. See and SolveTM with Tektronix Displays Tektronix See and SolveTM displays simplify video monitoring tasks such as calibration, error detection, and content correction allowing users to detect errors at a glance and troubleshoot them efficiently. Specialized Session and Status displays provide summarized yet comprehensive reports of conditions and measurements of content parameters. The Black and Frozen frame detection can be used to alert the operator to a problem in the transmission chain. These and other errors can automatically be logged in the Error Log and provided as a report. The powerful Error Log is configurable and provides detailed reports for up to 10, 000 events that can be downloaded using a web browser or saved through a front panel connection to a USB flash drive. Alarms can also activate ground closures and SNMP traps simplifying centralized monitoring of multiple programs. The FlexVuTM four-tile display provides maximum flexibility to increase your productivity. Unlike instruments with predetermined view combinations or limited choices, FlexVuTM lets you create a multiview display tailored to your specific needs and work practices. Each tile can be configured to enable easy signal analysis such as multiple alarm and status screens, different Safe Area Graticules and cursors on each tile, and more. Tektronix displays offer the sharpest CRT-like trace quality for clear waveform and vector monitoring without pixelation distortions. The familiar video waveform display can show SD/HD/3G-SDI signals in RGB, YPbPr, YRGB, or composite formats. Signal components can be displayed in either Parade or Overlay mode. [. . . ] For decoded Dolby Digital, output is 24 bits at a rate of 32, 44. 1, or 48 kHz for any one decoded pair. For decoded Dolby E, the output is 24 bits at 48 kHz or 47. 952 kHz for up to four pairs BNC, 75 terminated, unbalanced, 0. 9 Vp-p to 1. 1 Vp-p into 75 >25 dB relative to 75 from 0. 1 to 6 MHz (typical) 3. 5 ns, peak, typical, with 700 Hz high-pass filter per AES specification (typical) +0. 1 dB from 20 Hz to 20 kHz, 0 to ­40 dBFS, sine wave, Peak Ballistic mode (except for within 5 Hz of some submultiples of the sampling frequency) 12 www. tektronix. com Advanced 3G/HD/SD-SDI Waveform Rasterizer -- WVR8300 · WVR8200 Analog Audio (Option DPE and AD) Characteristic Description Capabilities by Model Capability Video Formats and Inputs WVR8300 WVR8200 Analog Inputs Two sets of 6 channels each Analog Input Balanced, unterminated through the rear-panel Characteristics connector <90 dB Crosstalk Input Impedance 24 k, typical 8 channels Analog Outputs Analog Output Characteristics Balanced Unterminated through the rear-panel connector Maximum Output Level Balanced +24 dBu ±0. 5 dB Digital Input to Analog ±0. 5 dB, 20 Hz to 20 kHz, ­40 dBFS, 20 or 24 bit inputs Output Gain Accuracy over Frequency Analog Input to Analog +0. 8 dB, 20 Hz to 20 kHz, 24 dBu to ­16 dBu Output Gain Accuracy over Frequency Output Impedance 50 nominal HD-SDI / Dual Link / SD-SDI 3G-SDI (Level A and Level B) 4 SDI Input Monitoring Composite PAL/NTSC Audio Formats and Inputs Standard Option 3G Option 2SDI Option CPS Option AD or DPE Option AD or DPE Option DPE Standard Option 3G Option 2SDI Option CPS Option AD or DPE Option AD or DPE Option DPE Embedded and AES Digital Audio Analog Audio Dolby E / Dolby Digital Plus / Dolby Digital Jitter Measurements Eye Pattern Display Eye Pattern Auto Measurements Pathological Signal Generation Physical Layer Measurement Option PHY Option PHY Option PHY Option PHY Option EYE Option EYE Power Characteristic Description Power Consumption Voltage Range 100 W maximum 100 to 240 VAC ±10%; 50/60 Hz Other Advanced Capabilities Physical Characteristics WVR8300/8200 Dimension mm in. Height Width Depth, overall Weight 44 483 498 kg 1. 725 19 19. 625 lb. Advanced Color Gamut (Spearhead/LQV) Simultaneous Input Monitoring (SIM) 3D Video Monitoring ANC Data Inspector Digital Data Analysis Out-of-Service AV Delay Measurement Option PROD Standard Standard Standard Standard Standard Option PROD Option 3D Option 3D Option DAT Option DAT Net Shipping WVR8RFP Dimension 4. 3 8. 5 mm 9. 5 18. 5 in. Height Width Depth Weight 44 483 114 kg 1. 725 19 4. 5 lb. Net with 25 ft. cable, power supply, and power cord 0. 79 1. 9 1. 75 4. 1 www. tektronix. com 13 Data Sheet WVR8000 Series Rear Panel. Ordering Information Note: Please specify power plug when ordering. Product Nomenclature and Descriptions Model Option Description WVR8300 3G 2SDI*2 CPS*2 AD DPE PHY PROD 62 WVR8200 3G 2SDI*2 CPS*2 AD DPE EYE PROD 3D DAT 62 WVR8RFP 01 Advanced 3G/HD/SD Waveform Rasterizer, 2 SDI inputs (3G-SDI, HD-SDI, and SD-SDI support on the same inputs ­ auto detect) Base unit includes HD-SDI, SD-SDI, Dual Link signal formats, Simultaneous Input Monitoring (SIM), advanced data analysis, 3D Video Monitoring, and audio/video delay measurement (requires an audio option) Option 3G required for 3G-SDI support Add support for 3G-SDI signal formats Adds additional SDI module (in Slot 2) to support up to 4 SDI inputs within Multi-mode displays (3G-SDI, HD-SDI, and SD-SDI support on the same input ­ auto detect) Option 3G required for 3G-SDI support Add support for composite analog video monitoring; 2 composite analog inputs; passive loopthrough Add analog audio monitoring (2 sets of 6-channel analog audio inputs and 8-channel analog audio outputs) plus 16 channels embedded or AES/EBU digital audio support (8 channels at a time) Add Option AD capabilities (analog and digital audio ­ embedded or external AES) plus support for decoding and monitoring Dolby E, Dolby Digital, and Dolby Digital Plus Physical Layer Measurement Package (includes 3G-SDI, HD-SDI, and SD-SDI eye pattern and jitter waveform displays; automated measurements of eye pattern parameters, jitter, and cable parameters; color bar and pathological signal generation) Option 3G required for 3G-SDI support Advanced Gamut Monitoring Package (Spearhead Gamut display and Luma Qualified Vector display) Analog Audio Breakout Cable, 6 feet, male 62-pin connectors to 8 XLR male output connectors and 12 XLR female input connectors 3G/HD/SD Waveform Rasterizer, 2 SDI inputs (3G-SDI, HD-SDI, and SD-SDI support on the same inputs ­ auto detect) Base unit includes HD-SDI, SD-SDI, and Dual Link signal formats support Option 3G required for 3G-SDI support Add support for 3G-SDI signal formats Adds additional SDI module (in Slot 2) to support up to 4 SDI inputs within Multi-mode displays (3G-SDI, HD-SDI, and SD-SDI support on the same input ­ auto detect) Option 3G required for 3G-SDI support Add support for composite analog video monitoring; 2 composite analog inputs; passive loopthrough Add analog audio monitoring (2 sets of 6-channel analog audio inputs and 8-channel analog audio outputs) plus 16 channels embedded or AES/EBU digital audio support (8 channels at a time) Add Option AD capabilities (analog and digital audio ­ embedded or external AES) plus support for decoding and monitoring Dolby E, Dolby Digital, and Dolby Digital Plus Eye pattern display and Jitter Measurement Package (includes 3G-SDI, HD-SDI, and SD-SDI eye pattern display; automated measurements of jitter and cable parameters) Option 3G required for 3G-SDI support Advanced Gamut Monitoring Package (Spearhead Gamut display and Luma Qualified Vector display) 3D Video Monitoring (Left Eye/Right Eye Side by Side Simultaneous Monitoring with SyncVuTM) Add Advanced 3G/Dual-Link/HD/SD-SDI Data Analyzer and Ancillary Data Analyzer (Datalist and ANC Data Inspector) Option 3G required for 3G-SDI support Analog Audio Breakout Cable, 6 feet, male 62-pin connectors to 8 XLR male output connectors and 12 XLR female input connectors Remote Front Panel for WVR8xxx Series Waveform Rasterizer (includes 25 foot cable) 100 foot cable for WVR8RFP Rasterizer Remote Front Panel *2 Option 2SDI and Option CPS cannot be installed in the same instrument. 14 www. tektronix. com Advanced 3G/HD/SD-SDI Waveform Rasterizer -- WVR8300 · WVR8200 International Power Plugs Option Description Opt. Opt. A0 A1 A2 A3 A5 A6 A10 A12 A99 North America power Universal Euro power United Kingdom power Australia power Switzerland power Japan power China power Brazil power No power cord or AC adapter Post Sale Upgrade Options Model Option Description WVR830UP 3G 2SDI*2 CPS*2 AD DPE PHY PROD IF IFC WVR820UP 3G 2SDI*2 CPS*2 AD DPE EYE PROD 3D DAT IF IFC Post sale upgrade for WVR8300 Advanced 3G-SDI / Dual Link / HD-SDI / SD-SDI Waveform Rasterizer Option 3G required to be installed in the WVR8300 for 3G-SDI support Add support for 3G-SDI signal formats (software option key) Adds additional SDI module (in Slot 2) to support up to 4 SDI inputs within Multi-mode displays (3G-SDI, HD-SDI, and SD-SDI support on the same input ­ auto detect) Option 3G required for 3G-SDI support Add support for composite analog video monitoring; 2 composite analog inputs; passive loopthrough Add analog audio monitoring (2 sets of 6-channel analog audio inputs and 8-channel analog audio outputs) plus 16 channels embedded or AES/EBU digital audio support (8 channels at a time) Add Option AD capabilities (analog and digital audio ­ embedded or external AES) plus support for decoding and monitoring Dolby E and Dolby Digital Plus Add Physical Layer Measurement Package (includes 3G-SDI, HD-SDI, and SD-SDI eye pattern and jitter waveform displays; automated measurements of eye pattern parameters, jitter, and cable parameters; color bar and pathological signal generation) Option 3G required to be installed in the WVR8300 for 3G-SDI support Add Advanced Gamut Monitoring Package (Spearhead Gamut display and Luma Qualified Vector display) Upgrade installation service Upgrade installation service and calibration Post sale upgrade for WVR8200 3G-SDI / Dual Link / HD-SDI / SD-SDI Waveform Rasterizer Option 3G required to be installed in the WVR8200 for 3G-SDI support Add support for 3G-SDI signal formats (software option key) Adds additional SDI module (in Slot 2) to support up to 4 SDI inputs within Multi-mode displays (3G-SDI, HD-SDI, and SD-SDI support on the same input ­ auto detect) Option 3G required for 3G-SDI support Add support for composite analog video monitoring; 2 composite analog inputs; passive loopthrough Add analog audio monitoring (2 sets of 6-channel analog audio inputs and 8-channel analog audio outputs) plus 16 channels embedded or AES/EBU digital audio support (8 channels at a time) Add Option AD capabilities (analog and digital audio ­ embedded or external AES) plus support for decoding and monitoring Dolby E and Dolby Digital Plus Add eye pattern display and Jitter Measurement Package (includes 3G-SDI, HD-SDI, and SD-SDI eye pattern display; automated measurements of jitter and cable parameters) Option 3G required to be installed in the WVR8200 for 3G-SDI support Add Advanced Gamut Monitoring Package (Spearhead Gamut display and Luma Qualified Vector display) 3D Video Monitoring (Left Eye/Right Eye Side by Side Simultaneous Monitoring with SyncVuTM) Add Advanced 3G/Dual-Link/HD/SD-SDI Data Analyzer and Ancillary Data Analyzer (Datalist and ANC Data Inspector) Option 3G required for 3G-SDI support Upgrade installation service Upgrade installation service and calibration *2 Option 2SDI and Option CPS cannot be installed in the same instrument. www. tektronix. com 15 Data Sheet Service Offerings Service Description WVR8300, WVR8200, WVR8RFP Opt. [. . . ]