User manual TELEFUNKEN DPF 15002

[. . . ] the risk WARNING orTo reducepersons: of burns , fire , electric shock , injury to 1. Close attention is necessary when this sewing machine is used by or near children. Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. [. . . ] Straight stitch left needle position • For top stitching etc. Straight stitch with auto-reverse stitch center needle position 04. Straight stitch with auto-reverse stitch left needle position 05. Straight stretch stitch • Reinforcement straight stitch 07. Round Ended Buttonhole with cross bar 112. Ojal reforzado Las marcas de la tabla significan: Point miroir possible Point inversé possible Point inversé et miroir possible X2 Élongation possible Puntada invertida posible Puntada reversible posible Puntadas invertidas y reversible posibles X2 Alargamiento posible 49 STRAIGHT STITCH SEWING Straight stitch patterns should be selected to suit the type of fabric being sewn. 2) is most suited for sewing light weight fabrics. Center needle Position Left needle Position Center needle with built-in reverse stitch Left needle with built-in reverse stitch General Purpose Foot (A) A. Position the fabric under the presser foot and lower it. Place hand lightly on the fabric while sewing. When you reach the end of seam, stop sewing. Place thread that contrasts to the color of the fabric on the bobbin. When you sew, bobbin thread will pull to the top and give the appearance of a traditional hand quilting stitch. 55 ZIGZAG STITCH SEWING Your machine can sew zigzag stitches of various widths and lengths by changing the settings of the stitch width and stitch length. 9 Zigzag Stitch General or Satin Foot (A, B) Zigzag stitches are very good for joining two pieces of fabrics, applique and sewing various decorative patterns. SATIN STITCHING When you sew the satin stitch by shortening the stitch length, attach the satin foot. Elastic Band Sewing Pull elastic in front and back of needle while sewing. FREE ARM SEWING By simply removing the extension table, machine becomes a free arm machine making hard to reach areas readily accessible. 0) Overcasting Foot (C) Press fabric against the guide plate of the overcasting foot so that needle falls near the edge of seam. 15, 16, 30 can sew overcasting and regular stitches at the same time. Therefore it is convenient for sewing easy to ravel and stretch fabrics. Overcasting foot should be used for sewing patterns 9, 15, 16, 30 only and do not change the stitch width narrower than 5. [. . . ] If patterns are misformed as illustration (a), turn screw in direction of symbol (+). If patterns are misformed as illustration (b), turn screw in direction of symbol (–). If patterns are misformed as illustration (c), turn screw in direction of symbol (+). If patterns are misformed as illustration (d), turn screw in direction of symbol (–). [. . . ]