User manual TELEX AUDIOCOM IC-2B REV B

[. . . ] Model IC-2B Two-Channel Remote Belt-Pack Headset Station Installation and Operation Instructions General Description The IC-2B is a two-channel, binaural headset station designed for use in balanced AudiocomTM intercom systems. It is connected to the intercom system by means of a quick-disconnecting cable terminated with XLR-6 connectors (not supplied), and it receives operating power from thei ntercom system via the cable. · Installation Plug a 6-pin cable into either intercom cable connector on the bottom of the belt-pack and into the master staion or power supply. [. . . ] To talk, set the master MIC switch to the ON position, and then select one or both channesl by depressing the CHANNEL select push buttons. The MONO/STEREO select switch works in two ways: Sidetone Level Adjustment The SIDETONE ADJ level trimmers control the level of your own voice in the headphoens. A level trimmer is provided for each channel. If your voice seems too loud or soft when speaking, adjust the trimmers, as desired. 2. 3. Permanent Mounting Permanent mounting may be accomplised by removing the belt clip and utilizing the threaded belt clip mounting holes to secure the belt-pack to other equipment. Screws may extend no more than 3/16-inch into the belt-pack. 4. SIDETONE LEVEL ADJUSTMENT TRIMMERS SEPARATE CHANNEL 1 AND CHANNEL 2 VOLUME AND MIC ON/OFF CONTROLS SIDETONE ADJ 1 2 CHAN 1 CHAN 2 VOLUME MADE IN U. S. A. CATALOG NO. 96099-00 VOLUME MIC OFF ON CARBON HEADSET MONO STEREO CARBON-MIC HEADSET CONNECTOR INTERCOM CABLE CONNECTORS DYNAMIC-MIC HEADSET CONNECTOR MASTER MIC ON/OFF MONO/STEREO SELECT PROPRIETARY NOTICE The product information and design disclosed herein were originated by and are the property of Telex Communications, Inc. Telex reserves all patent, proprietary design, manufacturing, reproduction, use and sales rights thereto, and to any article disclosed therein, except to the extent rights are expressly granted to others. RETURN SHIPPING INSTRUCTIONS Customer Service Department Telex Communications, Inc. (Lincoln, NE) Telephone: 402-467-5321 Fax: 402-467-3279 Factory Service: 800-553-5992 Please include a note in the box which supplies the company name, address, phone number, a person to contact regarding the repair, the type and quantity of equipment, a description of the problem and the serial number(s). COPYRIGHT NOTICE Copyright 2006 by Telex Communications, Inc. Reproduction, in whole or in part, without prior written permission from Telex is prohibited. Shipping to the Manufacturer All shipments of product should be made via UPS Ground, prepaid (you may request from Factory Service a different shipment method). Any shipment upgrades will be paid by the customer. The equipment should be shipped in the original packing carton. [. . . ] Attn: Service WARRANTY NOTICE See the enclosed warranty card for further details. CUSTOMER SUPPORT Technical questions should be directed to: Customer Service Department RTS/Telex Communications, Inc. 12000 Portland Avenue South Burnsville, MN 55337 USA Telephone: 800-392-3497 Fax: 800-323-0498 Factory Service: 800-553-5992 38109-348 Rev B 06/2006 [. . . ]