User manual TELEX AUDIOCOM ICW-6 QUICK START GUIDE REV B

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TELEX AUDIOCOM ICW-6. We hope that this TELEX AUDIOCOM ICW-6 user guide will be useful to you.

Lastmanuals help download the user guide TELEX AUDIOCOM ICW-6.

Download

You may also download the following manuals related to this product:

TELEX AUDIOCOM ICW-6 REV C (454 ko)

Manual abstract: user guide TELEX AUDIOCOM ICW-6QUICK START GUIDE REV B

Detailed instructions for use are in the User's Guide.

 [. . . ] NOTICE USE THE POWER SUPPLY INCLUDED WITH THE ICW-6. USE OF ANY OTHER POWER SUPPLY COULD DAMAGE THE ICW-6 AND WILL VOID THE WARRANTY. 

Quick Start Guide for ICW-6 Window Intercom 9000-7855-000
Packing list
Please inspect package contents 1. 

Installation
To install the ICW-6 window intercom,  do the following: On the operator unit,  remove the two (2) side screws holding the mounting plate to the operator assembly.  [. . . ] Attach the mounting template (included in box - P/N LIT000401000) to the window (customer unit side) being sure to center the appropriate guide in the location identified. Cut and/or drill the holes from the customer unit side. Have an assistant place the customer unit against the window. Attach the mounting plate removed from the operator assembly using the three (3) supplied mounting screws and rubber washers. 

9. 

Attach the cable harness from the customer unit to the connector on the operator unit. Attach the operator unit to the mounting plate using the side screws. 

10. Screw the threaded end of the ICW-6 power supply interface cord into the ICW-6. The connector is located on the bottom of the ICW-6 on the operator unit. Secure the cord to the glass using wide clear adhesive. Connect the power supply to AC power using the supplied power cord. Remove the lower left screw and washer and attach the ground wire. 
Copyright

©

Bosch Security Systems 2009

Printed in USA

Inside Mic Sensitivity Adjustment
On the ICW-6,  you can adjust the sensitivity of the inside and outside mic.  [. . . ] OR Turn the mic pot counter-clockwise to decrease the sensitivity. 

Mic Adjustment Pot Location
3. By default,  the following applies: · · The inside mic is set midpoint,  2"- 3" Speak Zone The outside mic is set midpoint,  1' - 2' Speak Zone 4.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TELEX AUDIOCOM ICW-6

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TELEX AUDIOCOM ICW-6 will begin.