User manual TENDA G1008D

[. . . ] All photos and product specifications mentioned in this manual are for references only. Upgrades of software and hardware may occur; Tenda reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. If you would like to know more about our product information, please visit our website at www. tendacn. com or www. tenda. cn G1008D 200Mbps PowerLine Mini Adapter Table of Contents CHAPTER 1 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Keep clicking “Next” until below screen is displayed. 13 G1008D 200Mbps PowerLine Mini Adapter 9. Click “Finish” on WinPcap Setup Wizard and then “Finish” on below screen: 10. To run the utility, simply double click 14 on your desktop. G1008D 200Mbps PowerLine Mini Adapter Chapter 4 Configuration This section instructs you how to config advanced settings on the G1008D utility, such as encryption, changing device name, QoS, and restore factory defaults, etc. You can also view other adapters on the powerline network and their link rates. 4. 1 Interface Overview After the utility is installed, double-click the Tenda PowerLine AV Utility icon on your desktop to start the configuration of the G1008D. Four menus are included on the utility as seen below: Adapter, QoS, Tools and Help. The left area on the Utility displays a list of local Powerline adapters while the right area shows more info of such adapters.  HomePlugAV Displays local Powerline network name. Powerline adapters MUST share an identical network name to establish a Powerline network. Based on the network name, the Powerline 15 G1008D 200Mbps PowerLine Mini Adapter network is classified into 2 types: a Powerlilne network named “HomePlugAV” is considered a public network otherwise identified as a private network.  CCO Displays the adapter for managing other adapters on a Powerline network. When attempting to connect to each other, adapters automatically negotiate with each other to select an adapter as CCO.    : Displays the adapter directly connected to the PC that is running the Utility. As any change on such value may deactivate the corresponding functionality. Add: Click it to add a MAC/IP based priority entry.  Prio: Short for Priority. Select a number from the drop-down list. To set highest priority level, select “3”.  Traffic Type: Select MAC address or IPv4 address from the drop-down list.  Value: MAC address must be entered in the form of xx:xx:xx:xx:xx:xx (for example: 00:12:34:56:78:9a) while IP address must be in the form of yyy. yyy. yyy. yyy (for example: 192. 168. 0. 100). For example: to set data carrying the IP address of 192. 168. 1. 100 to the priority level of 2, config as seen below: 22 G1008D 200Mbps PowerLine Mini Adapter After you completed settings on above screen, click on “OK” to add the entry. 2 new settings will be added to the QoS list.  Delete: Click it to remove the selected entry/entries from the list. For example: To delete entry 9, first click on the item number of “9”. 23 G1008D 200Mbps PowerLine Mini Adapter And then click the “Delete” button.  Apply changes to all adapters found: Clicking “Save” with the option disabled applies the QoS settings to current adapter while Clicking 24 G1008D 200Mbps PowerLine Mini Adapter   Tips 1. The default QoS policy for the device includes 8 ToS rules and 1 IP multicast rule, which will be deleted if the QoS-Quick Setup functionality is activated. You can only apply a single option in Quick Setup to an adapter at a time. [. . . ] When the 2 adapters interconnect successfully, you can access Internet. Do I need to install a utility to use the device?The device is plug-&-play powerline adapter. Two such devices connected to the same electricity meter are able to interconnect automatically, no configuration required. [. . . ]