User manual TENDA TEH1600M

[. . . ] All photos and product specifications mentioned in this manual are for references only. Upgrades of software and hardware may occur; Tenda reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. If you would like to know more about our product information, please visit our website at www. tenda. cn. 1 TEH1600M 150Mbps Portable 3G Wireless Router Content COPYRIGHT STATEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CHAPTER 1 PRODUCT OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Broadcast (SSID): Select “Disable” to hide your SSID. With this option disabled, no wireless clients will be able to see your wireless network when they perform a scan to see what’s available. If they want to connect to your router, they will have to first know your SSID and then manually enter it on their devices. BSSID：Basic Service Set Identifier of wireless network. In IEEE802. 11, BSSID is the MAC address of a wireless AP. Channel: Indicates the channel setting for the TEH1600M. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. From the drop-down list ， you can select a most effective channel, which ranges from 1 to 13. You can also select “Auto 39 TEH1600M 150Mbps Portable 3G Wireless Router Select” to let system detect and choose one that best fits your network. Extensional Channel： Indicates the network frequency range for 11n mode. Channel Bandwidth: Select a proper channel bandwidth to enhance wireless performance. IP pool end address: Enter the ending IP address for the DHCP server’s IP assignment. Lease Time: The length of time for the IP address lease. Configuring a proper lease time improves the efficiency for the DHCP server to reclaim disused IP addresses. For example： If the lease time is an hour, then DHCP server will reclaim IP addresses every hour. 7. 2 DHCP Clients DHCP client list displays the IP addresses, which clients obtained from the device's DHCP server, MAC addresses, host names and lease time. If you would like some devices on your network to always have fixed IP addresses, you can manually add a DHCP Reservation for each such device. You can manually add an IP address and a MAC address and check the IP-MAC Binding option, and then whenever a host with this MAC address connects to the router, it will always get the same IP address (the one you just added). According to the connected computer's MAC address, the router checks relevant entries in its DHCP reservation list and decides what IP address to assign to this host (an unused IP from 45 TEH1600M 150Mbps Portable 3G Wireless Router DHCP IP address pool, or a reserved one): If it fails in finding a reserved IP address bound to the PC with this MAC address in the list, it will immediately assign an unused IP from its DHCP IP address pool; and if such IP is found, it will be assigned to this host so as to ensure that host with a DHCP reservation always get this fixed reserved IP address. Once a host registers DHCP reservation to have a fixed IP address bound to its MAC address, it can not use a different IP address except this one to connect to the router for Internet access. Thus, due to DHCP reservation, a host is prevented from escaping monitoring by changing its IP address. IP Address: Enter the IP address which needs static binding. MAC Address: Enter the MAC address of the computer you want to bind. Host name: It displays the name of the bound computer. [. . . ] 80 Please replace the default MTU value with the recommended value of 1450 or 1400 in the “WAN Setting” TEH1600M 150Mbps Portable 3G Wireless Router Step 3: Input the external service port, for example, 80. Step 4: Input the internal Web service port, for example, 80. Step 5: Input the internal server’s IP address. For example, if your Web server’s IP address is 192. 168. [. . . ]