User manual TENDA W311R

[. . . ] 11N Wireless Broadband Router 1 11N Wireless Broadband Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co. , Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co. , Ltd. Without the permission of Shenzhen Tenda Technology Co. , Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. [. . . ] WPS Configured "yes" means WPS feature is enabled and goes into effect. "not used" means it is not used. Usually the AP-security has been enabled, here will displayed "not used". 43 11N Wireless Broadband Router WPS Auth. Mode The authorization mode deployed by WPS, generally WPA/WPA2-personal mode. WPS Encrypt TypeThe encryption type used by WPS, generally AES/TKIP. WPS key The effective key generated by AP automatically. Reset OOB When this button is pressed, the WPS client will be idle state, and WPS indicator will be turned off. AP will not respond the WPS client's requests and the set the security mode as WPA mode. 6. 5 WDS Settings WDS (Wireless Distribution System) is used to expand wireless coverage area. This Router provides three modes: Lazy, Bridge and Repeater. 44 11N Wireless Broadband Router Lazy: In this mode, the connected device can be Bridge mode or Repeater mode and enter the Router's BSSID to establish the connection. Bridge: You can wirelessly connect two or more wired networks via this mode. In this mode, you need to add the Wireless MAC address of the connecting device into the Router's AP MAC address table or select one from the scanning table. Repeater ModeIn this mode, add the opposing MAC address into each own AP MAC address table by manual or scanner to enlarge and extend the wireless radio. Encrypt Type: Select one from WEP, TKIP, AES for security here. Pass phrase: Enter the encrypted key for wireless devices. AP MAC: Input the MAC address of another (opposing) wireless router you want to connect. NOTE: It is recommended that two wireless routers keep the same bandwidth, channel number, and security settings. Apply the settings and reboot the Router to activate it. 45 11N Wireless Broadband Router 6. 6 Wireless Access Control To secure your wireless LAN, the wireless access control is actually based on the MAC address management to allow or block the specific clients to access the wireless network. Select "Wireless Setting->Access Control" to display the following screen: MAC Address FilterEnable/disable MAC address filter. Select "Close" to malfunction MAC address; "disable" to prevent the MAC addresses in the list from accessing the wireless network; "Allow" to allow the MAC address in the list to access the wireless network. MAC Address Management Input the MAC address to implement the filter policy. Click "Add" to finish the MAC add operation. [. . . ] 2Forget the login password and can not enter the setting page. Press the "RESET" button for 7 seconds to restore the Router to default settings. 3The computer connected with the Router shows IP address conflict. Check if there are other DHCP servers in the LAN. The default IP address of the Router is 192. 168. 0. 1 and please maker sure the address is not occupied by other devices. [. . . ]