Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual THETFORD SANI-CON. We hope that this THETFORD SANI-CON user guide will be useful to you.
Lastmanuals help download the user guide THETFORD SANI-CON.
Detailed instructions for use are in the User's Guide.
[. . . ] Thetford Corporation accepts no responsibility or liability for damage to equipment, injury, or death that may result from the unit's improper installation, service, or operation. Wear appropriate personal protective equipment when installing and using the SaniCon system. Do not make any changes to this unit, as this could result in property damage or injury. Flush only organic human waste and toilet tissue. [. . . ] connect the bayonet adapter to the RV's drain outlet. Make sure that the motor slopes down from the outlet valve. Good - cut to length Correct couper à la bonne longueur Aceptable: corte a la medida Externally it must be shielded from road debris and rainwater. Also use a flexible metal strap to support the weight of the macerator. Make sure that the motor slopes down from the drain outlet valve. Make sure that the Sani-Con system's power switch is in the Off position. Follow all applicable RVIA / NFPA / NEC codes during the installation and when using this product. The following electrical guidelines apply to all Sani-Con systems: All Sani-Con models require a 20 AMP, 12 VDC dedicated power source. All hardwired systems must have a 20 AMP fuse or breaker installed within 18 in. You must use 10-gauge wire if the length of the wire between the SaniCon system and the power source exceeds 20 ft. Protect the wires with a sheath (not provided) to prevent the wire from getting snagged or cut during installation and use. Make sure that the Sani-Con's power switch is turned to the Off position. disconnect the red (positive) cable to the RV's battery. Locate the power source where the electrical connection will be made. Or less, that will run from the breaker to the power source, and set it aside for later use. Using the red wire that you cut in Step 10. À l'aide du fil rouge coupé à l'étape 6, 6 of this procedure, crimp the small ring sertissez une petite cosse ronde à une terminal on one end and the large ring extrémité et une grande cosse ronde à terminal on the opposite end. Fixez la grande cosse ronde à la borne positive terminal on the battery or other positive de la batterie ou de la source main power source. Protect the wires that are routed from 13. Reconnect the red cable that you disconnected in Step 2 of this procedure to the RV's battery. [. . . ] Make sure that the: The shaft does not turn when power is being supplied to the pump. Insert a flat head screwdriver into the small hole in the bottom of the motor (this is the end of the pump shaft). Small leaks occur around the hose connections. The toggle switch feels limp when activated. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THETFORD SANI-CON
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual THETFORD SANI-CON will begin.
